Powder Coat removal

« **on:** March 23, 2008, 10:59:18 PM »

Was looking online for ways to "At home strip" the old powder coat off my pump and came across this:

http://www.choppersurplus.com/global/articles/howtoremovepowdercoating.html

Any one had any luck with this or have other suggestions?

« **Reply #1 on:** March 23, 2008, 11:18:50 PM »

Good luck, that shits hard to get off even with a media blaster

« **Reply #2 on:** March 23, 2008, 11:46:41 PM »

Please let me know if that stuff works ! I have boxes of old parts that need to be striped

« **Reply #3 on:** March 24, 2008, 12:21:04 AM »

I guess I will have to buy a can and see what happens, I will let you guys know how it goes!

« **Reply #4 on:** March 24, 2008, 05:37:07 AM »

Quote from: OC2Vegas on March 23, 2008, 10:59:18 PM

Was looking online for ways to "At home strip" the old powder coat off my pump and came across this:

http://www.choppersurplus.com/global/articles/howtoremovepowdercoating.html

Any one had any luck with this or have other suggestions?

OC2, If that doesn't work, and you can buy that stuff at Auto Zone or Napa parts stores, try going to eastwood.com and looking at
http://eastwood.resultspage.com/search?p=Q&ts=custom&w=powder+coat+stripper&submit.x=0&submit.y=0&submit=Search
or try Caswell at
http://www.caswellplating.com/powder/s_stripper.html

I know it's all but impossible to strip even with a sand blaster especially if there is zink chromate as a primer.

« **Reply #5 on:** March 30, 2008, 05:45:51 AM »

I work in a shop that does some Powder Coating and we have an Industrial stripper like the one listed from Eastwood . It sounds like the same from the Eastwood description .
The one we have works very good . It only comes in a 55 gal drum for about $600.00
I would try the Eastwood one if I were you , As it says in the Eastwood ad keep the part wet with the stripper (submerged is best )

« **Reply #6 on:** March 30, 2008, 08:19:12 AM »

Im glad you posted this cause i need to strip my nozzle and adapter for a repaint.......

that shit in the can aint gonna work... Last time i used the aircraft paint remover, spray & gel and it was still a bitch

2sav

« **Reply #7 on:** March 30, 2008, 08:46:46 AM »

carb cleaner

OC2Vegas

Powder Coat removal

pw_Tony

Re: Powder Coat removal

propless

Re: Powder Coat removal

OC2Vegas

Re: Powder Coat removal

GAWnCA

Re: Powder Coat removal

gransport

Re: Powder Coat removal

2savage4you

Re: Powder Coat removal

HDriderTH

Re: Powder Coat removal