Pump rebuild issue i think

« **on:** February 14, 2018, 07:11:56 PM »

So i just freshly rebuilt my pump and motor....motor runs great boat runs really good overall but i noticed my place diverter point all the way up my rooster only goes up about 2-4 ft where it used to go way higher...

I replaced impellar from alluminun to stainless wondering if thats a factor...i dont feel any cavitation boat runs good...whats your guys opinion on this one....its berkley je by the way

Sent from my SM-G930T using SoCal Jet Boats mobile app

« **Reply #1 on:** February 14, 2018, 09:38:47 PM »

The impeller wouldn’t change that. It’s probably the adjustment in your diverter cable.

Sent from my iPhone using SoCal Jet Boats

« **Reply #2 on:** February 15, 2018, 07:00:45 AM »

Quote from: JordanDangerfield on February 14, 2018, 09:38:47 PM

The impeller wouldn’t change that. It’s probably the adjustment in your diverter cable.

Sent from my iPhone using SoCal Jet Boats

X2

« **Reply #3 on:** February 15, 2018, 06:21:17 PM »

Cable is probably slipping. Check the cable mount it may be sliding in it

Sent from my iPhone using SoCal Jet Boats

« **Reply #4 on:** February 16, 2018, 12:03:02 AM »

Thanks ill check all the above...

Sent from my SM-G930T using SoCal Jet Boats mobile app

« **Reply #5 on:** February 16, 2018, 11:00:58 AM »

When this happened to my Boat the clamp that holds the cable by the handle broke

Sent from my iPhone using SoCal Jet Boats

« **Reply #6 on:** February 18, 2018, 05:47:28 PM »

Ok guys so i checked the cables they seem to b good but now i noticed today on a test run i got water shooting up....whats your thoughts?

Sent from my SM-G930T using SoCal Jet Boats mobile app

« **Reply #7 on:** February 18, 2018, 05:53:12 PM »

Quote from: glencoe460 on February 18, 2018, 05:47:28 PM

Ok guys so i checked the cables they seem to b good but now i noticed today on a test run i got water shooting up....whats your thoughts?

Sent from my SM-G930T using SoCal Jet Boats mobile app

There’s a Teflon o ring that seals it .. where it pivots .

Sent from my iPhone using SoCal Jet Boats mobile app

glencoe460

Pump rebuild issue i think

JordanDangerfield

Re: Pump rebuild issue i think

mash on it

Re: Pump rebuild issue i think

77_liberty

Re: Pump rebuild issue i think

glencoe460

Re: Pump rebuild issue i think

placecraft jess

Re: Pump rebuild issue i think

glencoe460

Re: Pump rebuild issue i think

69kona

Re: Pump rebuild issue i think