Don't get off the gas 🙃


Sent from my iPhone using SoCal Jet Boats

We're going to need more info. Either have someone sit in back and watch as long as they know what they're looking at or point a Gopro at the area.

I'll try to get some footage tomorrow. I was just hoping someone remembered the other thread.

There's various possibilities of what's happening and why.

Indeed.

For starters, how are you getting out of the gas?

What position is the Diverter when you drop off the throttle?

Does it do it every time?

When you say motor,  how much of the motor gets wet?



GT

I believe this is why place makes "low mount" control systems or something to that effect. I've never had a problem with it although i get water spotting on the bottom rear 2-3" of my headers which I run dry for some reason. Maybe certain hulls/ pump/ hardware combinations cause it? I dunno but maybe the low controls are a possible solution?


Sent from my iPhone using SoCal Jet Boats

So some water splashing over transom is an issue.  I thought iteas normal. Both boats i jave owned always got a little water spray on engine...

I believe this is why place makes "low mount" control systems or something to that effect. I've never had a problem with it although i get water spotting on the bottom rear 2-3" of my headers which I run dry for some reason. Maybe certain hulls/ pump/ hardware combinations cause it? I dunno but maybe the low controls are a possible solution?


Sent from my iPhone using SoCal Jet Boats

I talked to Tim at Place Diverter and he said although rare it does occur with some hulls where the water will sometimes come off of the control arm and follow the cable up causing this. He suggested making a shield to prevent this. Has anybody done this or have pics of someone who has? Thanks

Thanks