Null


Pages: [1]

Riverguy553

  • Karma: +1/-0
Water leak help!
« on: July 15, 2012, 02:56:03 PM »
So I finally got my motor done and did a test run 2 weeks ago. The boat was taking on a ton of water thru the transom plate. So I pulled it off and there was no oring. So I ordered the seal kit and put it all back together and now it's not pissing in water with just the boat floating in the water. Now the problem is if I go above 5000 rpm the boat is taking on a lot of water, but if I cruise at 3500-4000 rpm I see zero water coming in. Any help on this would be great!
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

hillbilly deluxe

  • Karma: +0/-0
Re: Water leak help!
« Reply #1 on: July 15, 2012, 10:37:53 PM »
Might be a ripped hose, hook up a garden hose to it and build up the pressure real slow while you or someone else watches for the leak. It sounds like when the pump builds enough pressure it shows its ugly face. :beer: Be careful most house hold water pressure is about 75psi, you only want about 20psi in your engine. Rory
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

crewchief22

  • Karma: +66/-0
Re: Water leak help!
« Reply #2 on: July 15, 2012, 10:54:44 PM »
Don't run water into the engine without the engine running!   Period!
Logged
  • Boat #1: '77 Hondo Pantera GT Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
"Racing is life!  Anything that happens before or after, is just waiting"    Steve McQueen

The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?

BIG JOHNSON

  • Karma: +1/-0
Re: Water leak help!
« Reply #3 on: July 16, 2012, 12:24:31 AM »
And don't run the engine without the pump in the water.

Sent from my ADR6400L using Tapatalk 2
Logged
  • Boat #1: 1994 Ultra LX 21"
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

ka0tyk

  • Karma: +30/-0
Re: Water leak help!
« Reply #4 on: July 16, 2012, 12:53:35 AM »
Have someone drive while you find the leak... Make sure you hold on especially if you have headers so you don't get burnt.

It's probably a seal or perhaps some silicone that isn't sealing well.  The force of water when you're going 5k is pretty intense.
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

mash on it

  • Karma: +29/-0
Re: Water leak help!
« Reply #5 on: July 16, 2012, 07:53:41 AM »
Had a similar thing happen on my Saguaro, and the intake housing to the hull seal was cracked, I put 3" of water in the hull and found the leak real quick. pulled and reset intake, did shoe, rideplate and loader at the same time. I've seen a WJ intake missing 2 bolts, from the factory, NEVER drilled into the hull, leaking too.

Daniel
Mash on it
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
CJ/RR 212...under construction  "Pistol Annie"

Beaveretriever

  • Karma: +34/-0
Re: Water leak help!
« Reply #6 on: July 16, 2012, 11:59:17 AM »
Ill call you today, i totally forgot last night when i was driving.
Logged
  • Boat #1: 1981 Eliminator Daytona 19' Jet
  • Boat #2: 2003 22' Placecraft Deck boat
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

hillbilly deluxe

  • Karma: +0/-0
Re: Water leak help!
« Reply #7 on: July 17, 2012, 06:22:34 PM »
Quote from: crewchief22 on July 15, 2012, 10:54:44 PM
Don't run water into the engine without the engine running!   Period!

Pardon my ignorance Crewchief, I am new to boats but why no water with out it running. I made the mistake of running my boat with a hose hooked up in the driveway before I found this site to tell me not to. I ran it way to long and I am sure I hurt the pump but can't tell. Sorry back to topic!
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Pages: [1]
 


Null

SMFPacks CMS 1.0.3 © 2026