Stuff For Sale

« **on:** November 04, 2008, 04:29:53 PM »

Need to clean out the garage.
Brand new old stock BBC Hooker Headers dry - 350.00 Pending
Chrome valve covers BBC, fair condition - 40.00 Pending
Scoop good shape needs polish - 90.00
Flame arrestor 8x3 w/ 5" flange (alum) - 20.00
Ski tow BBC has rust needs cleaning up - 20.00

All prices plus shipping

« **Reply #1 on:** November 04, 2008, 04:50:26 PM »

Tunnel Ram BBC Rec port - the only # on it is underneath CR1985
Probably had a # on top but polished off 100.00 PENDING
Carter carbs 625cfm - need rebuild 100.00
Holley 600 cfm - #4776-2 bought from bulldawg art, he said they
were just rebuilt paid 400.00 400.00

Plus Shipping

« **Reply #2 on:** November 04, 2008, 04:56:27 PM »

Ron I have a 10x20 storage unit you can store all in. Thats where your 460 is right now

. Is Cindy going to sell my sanger too thats sitting on the back 40? haha

« **Reply #3 on:** November 04, 2008, 05:13:06 PM »

Black Gaffrig w/ convex lens - Anno slightly discolored 100.00
Formuling steering wheel 40.00 Sold
Medallion gauges w/ bezels - no volt gauge 50.00
Faria gauges w/Beede trim - Speedo lens is dirty on the inside
Tach looks new 75.00 Sale Pending
Rex tach 20.00
Eliminator speedo 20.00 Sold

« **Reply #4 on:** November 06, 2008, 07:09:29 PM »

Stanless Scoop - Brand new just took it out of the plastic bag.
Paid 160.00 plus tax Just for you 120.00 obo

« **Reply #5 on:** November 06, 2008, 09:37:42 PM »

PM sent.

« **Reply #6 on:** November 07, 2008, 11:03:10 AM »

Are the headers jet or V drive?

« **Reply #7 on:** November 07, 2008, 11:10:57 AM »

Ron is csared of V-Drives, sez there is to much hardware hangin down there. So Im guessing they are for a jet.

« **Reply #8 on:** November 07, 2008, 01:51:51 PM »

still got the valve covers?? what do ya mean by...fair condition

PM and let me know...would ya? Thanx... Tracy

« **Reply #9 on:** November 07, 2008, 02:12:01 PM »

As for the headers; I have a V drive set and they will only clear about 12" from the rear port to the bottom of the collector. Whith my set up these only leave an 1/8th of clearance, I would like to have 15" plus if possible.

« **Reply #10 on:** November 07, 2008, 02:58:08 PM »

Sorry the headers are for a jet.

« **Reply #11 on:** November 07, 2008, 03:12:36 PM »

Tracy, there's no rust, just little pits and scratches. I just took some wonder cloth to one and it looks alright. A polish with some abrasives in it would probably do a better job. Ron

« **Reply #12 on:** November 07, 2008, 03:16:26 PM »

Sorry I led you to miss understand - I have a jet boat (Schiada 19), but I need to make sure they will clear the transum. The ones I metioned will not.

« **Reply #13 on:** November 07, 2008, 03:28:52 PM »

Quote from: Bull20 on November 07, 2008, 03:16:26 PM

Sorry I led you to miss understand - I have a jet boat (Schiada 19), but I need to make sure they will clear the transum. The ones I metioned will not.

I just measured from the collector to the top of the flange and its only 10 3/8.

« **Reply #14 on:** November 07, 2008, 03:38:47 PM »

Too bad, they must actually be V drive headers, but thank you for checking.

« **Reply #15 on:** November 07, 2008, 03:44:37 PM »

Quote from: Bull20 on November 07, 2008, 03:38:47 PM

Too bad, they must actually be V drive headers, but thank you for checking.

I wa told they were jet boat headers when I bought them. I just measured my old school Gil headers on my Rogers and there 9 1/2"

« **Reply #16 on:** November 07, 2008, 04:01:57 PM »

I also have a set of old school Gil"s, at that point they measure the same as you say. They should angle up after that, but hey if they match the Gil's about a foot back they should be good.

« **Reply #17 on:** November 07, 2008, 04:31:08 PM »

Here are some more pics

« **Reply #18 on:** November 07, 2008, 07:39:55 PM »

Those are jet headers , V-drive headers angle together as you go back . If that makes sense

-beerjet-

« **Reply #19 on:** November 08, 2008, 06:19:55 AM »

Great - any haggle room?

« **Reply #20 on:** November 08, 2008, 06:39:03 AM »

Quote from: Bull20 on November 08, 2008, 06:19:55 AM

Great - any haggle room?

fitty bux

« **Reply #21 on:** November 08, 2008, 08:10:42 AM »

Quote from: Bull20 on November 08, 2008, 06:19:55 AM

Great - any haggle room?

300.00 if you pick up

« **Reply #22 on:** November 08, 2008, 08:34:15 AM »

Done deal! Send me an address and I will forward the funds and then worry about the pickup. My soninlaw works in the Temecula to Palm Springs area, is that somewhat close to Valley Center or are they somwhere else? Thank you.

« **Reply #23 on:** November 09, 2008, 08:41:54 PM »

« **Reply #24 on:** November 09, 2008, 10:06:51 PM »

what size carter carbs

76 Bonneville

76 Bonneville

desrtrat256

76 Bonneville

76 Bonneville

Oldsquirt

Bull20

desrtrat256

skee

Bull20

76 Bonneville

76 Bonneville

Bull20

76 Bonneville

Bull20

76 Bonneville

Bull20

76 Bonneville

beerjet

Bull20

HDriderTH

76 Bonneville

Bull20

76 Bonneville

78CoLe