Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - oldmxdog61u

Pages: 1 ... 3 4 [5] 6
101
Projects / Re: Bimini Top install questions...
« on: July 06, 2010, 09:28:00 AM »
fwiw-
went with (local) performance marine install and 5 yr material (sunbrella) in burgandy to match the trim on boat. With install it was $40 more than internet price so I let them do it.
Will show pictures as soon as I get them off the camera.
What a difference it made at the lake- spent most of monday at Un pleasant and really enjoeyd it (no direct sun!).  Unfortunately it looks like it takes at least 10mph off the top end (? speedo not working I just installed).

102
Jet Pumps / Re: Trim Indicator?
« on: July 06, 2010, 09:24:07 AM »
I have a delco trim (raises and lowers snout) that is electrically operated with a three way switch (up/off/down). It uses a motor to drive a rack/gear to move cable and thus the snout.  There is a wire off the motor that may be the feedback for position (?).  Any body have any manufacturer info on these or how they are wired?
Who/where is gc@tom or whomever you mention might be able to help me out with parts (above posts) .  Fwiw I have a straight snout (not a drop) and it likes level or down to get up on plane quickly, and at speed anything short of level or down makes the bow bounce too much for my fried backbone. Is that common?

Thanks oh mighty  jetboat wizards.

ps: I can close my eyes here at work and feel that sensation of coming up on plane with the 454bbc romping and then...   oops, sh$t, my boss walks in  ;D

103
The No Wake Zone / Re: Lake Un Pleasant
« on: July 05, 2010, 08:02:43 PM »
Bartlett next trip. Boat working good as I learn... like getting gas at the bay and some fool cuts qacross my bow in the no wake zone and I am driving limp spagetti at that speed. Sheesh what a turd. I popped it in reverse ancd let him figufre out how to get outta my way. I still need lots of slow speed practice as manuevering is pretty funny. At least with ropes iget to the dock nice without jockeying around showing how bad I am at slow speed

104
The No Wake Zone / Re: Lake Un Pleasant
« on: July 04, 2010, 06:23:00 PM »
Bartlett... next trip for sure. Might seed ya...
Dirga dirga

105
Hulls / Boss Tahiti or ?
« on: July 04, 2010, 01:20:40 PM »
My 1982 (on registration) Tahiti registration says 20 ft, "day cruiser"  with a hull id TAHxxxxxM79H

Is this a 1979 I assume? I am trying to dtermine if this is the BOSS or the DAY CRUISER model...

Thanks again!

106
Jet Pumps / Trim Indicator?
« on: July 04, 2010, 12:57:08 PM »
My 79 Tahiti (20.5ft) 454 bbc/Berk has a trim indicator (not functional) mounted on the dash.  Anybody run one of these or have a good reason to (?) or do you just  watch the rooster and how the boat handles?  It looks like it ran a single wire down to the trim adjuster. Next time I get ambitious I will play with a voltmeter and see if there is a signal still, maybe p/o just disconnected it.

Since this is my first jet, I have ALOT to learn.
 

107
The No Wake Zone / Lake Un Pleasant
« on: July 04, 2010, 12:16:02 PM »
www.azfamily.com/outbound-feeds/yahoo-news/1-killed-3-hurt-in-boating-accident-on-Lake-Pleasant-97750629.html

Ouch!

Another reason I like early morning runs at the lake and stay away from anything that smells like an organized event (fire works that night). I went once years ago to this same event and swore never again. The mayhem was unbelievable.

108
The No Wake Zone / Re: GoPro Camera
« on: July 01, 2010, 10:39:38 AM »
fantastic little camera IMO.  The AVI files generated are a PITA if you are on windows, if you have a MAC you will quickly be making GREAT home movies of your trips.
ONLY use the battery type recommended, and memorize the blinking light pattern or you may end up with stills instead of video feed.

In my case-





109
Boat Showcase / Re: the new squeeze...82 Tahiti
« on: June 27, 2010, 06:55:15 PM »
registration says 20 ft, "day crusier"  with a hull id TAHxxxxxM79H

Is this a 1979 I assume? I am trying to dtermine if this is the BOSS or the DAY CRUISER model...

Thanks again!

110
put on/take out which ramp? is the current a big issue for a newbie?

fwiw, we walk it back on the trailer with ropes as it works everytime as compared with me low speed steering skills (not).

Blythe aint tha far for me, only anothe 1.5 hrs compared to the lake.

I was looking at google earth and the river looks shallow? any decent maps for the newbie out there for downloading for boating?
Thanks for your help and wisdomw. I bow and scrape at the feet of a wise old jet boater...

111
Engine Mechanical / Electrical / Gages? Auto or marine?
« on: June 24, 2010, 04:04:05 PM »
I see some folks posting they use auto gages, and others saying marine.
My boat is used on fresh water in arizona (hot, not particularly humid).

Any big difference beyond price?

112
Jet Pumps / Re: Rudder for my Berkley pump
« on: June 24, 2010, 12:19:48 PM »
fwiw- my tahiti has a rudder on a berkeley, prior owner (has had many jet boats) said it improved low speed directionality on this boat.  Since I did not take it off I dont know the difference.

113
Projects / Bimini Top install questions...
« on: June 22, 2010, 10:51:38 AM »
Looking at an Overtons Bimini for my Tahiti, since I am on fresh water thing that the aluminum should last ok (stainless is another $100). Question-
what kind of hardware did you use to mount your bimini? DId you use screws (what kind) or drill and nut/bolt  ?

Thanks for the help...

114
Boat Showcase / Re: the new squeeze...82 Tahiti
« on: June 22, 2010, 09:31:09 AM »
Ray-
I think I know where it is, its down the street from where I work on 5th street between smith and the access road.
Regarding the mounting, waht kind of mounting screws do you use (drilling into hull...yikes).
Wood screws? or thru bolt/nuts?

Went out again last night at un pleasant and runs great, plenty of fun. Wifey really likes it. She named it the Dirga-Dirga


115
Project Boats For Sale / Re: anything you need off it
« on: June 21, 2010, 02:45:21 PM »
tach or other gages availible?

116
Boat Showcase / Re: the new squeeze...82 Tahiti
« on: June 21, 2010, 02:40:49 PM »
thanks!
I hope it is as bulletproof and relaible as the prior owner thought it was.
I could use some experineced help checking out stuff on it though.
For example-Bimini's-
buy from Overtons or have local tempe shop make one? Install vertically (the mounts) or on the horizontal? about 6 ft long? 3 or 4 bow? How high?



117
Well, soon I hope! For now, I am trying local lake to make sure everything is working right and I get my skill levels up on this new to me boat. Slow speed manuevring is quite different than a prop for me (yikes!)
Once I have some time under my belt I will for sure, although I will want to go with someone that can give me a good river learnin experience as it has been years since I spent much time at the wheel, let alone a river with currents and shallows and traffic! I hate traffic! Here I go at end of day or early to avoid all that.
Big River looks nice form the oogle earth shots, and the offers for help here are welcome...I iwll need it as a NEWBIE!
ps: posted pics of the new squeeze (TAHITI) in the new boat sectin...

118
Boat Showcase / Re: the new squeeze...82 Tahiti
« on: June 21, 2010, 12:16:44 PM »
the pictures are up.
Anybody here is AZ inetersted in goingthru this beast with me to make sure everything is tip top before I go for an extended cruise. Being a newbie I am still trying to read here on what to look at and check.
It has two water temp gages and runs about 140 at temp on both. STill havenot found the water valves to adjust but prior owner says 140 is good. (??)
Next on my list is a decent tach.

119
Boat Showcase / the new squeeze...82 Tahiti
« on: June 21, 2010, 12:12:58 PM »
 ;D Hope to learn here on where to go from here on my new hobby. After two runs at the lake everything seems strong. Still correcting little things and will need to buff it out a bit, but overall really happy so far.
454cbb 40 hrs on rebuild (2 seasons ago) 30 over, cam, pistons, rods, manifold, has 650 (?) on it now, stainless tanks, berlekley jet.

Needs some TLC for cosmetic stuff as far as I can tell, plus need a tach, reliable gas gage, and a decent momentart trimswitch.

will post pictures...

120
Suggestions / Support / Re: Members, Heros and Whores!
« on: June 17, 2010, 10:50:32 AM »
even if i do post over 50 I will still be a newbie.... maybe next year...

121
Interior / Re: steering wheel
« on: June 17, 2010, 10:29:22 AM »
how hard is the rubber? If its still hard, clean it, then use a product like plastic renewzit for returning gloss to plastic. go slow, it can work. I have brough other plastics back from oxidized hell to a nice gloss.

OR, if it is clean (not soaked in armorall or the like) you can shoot it with a high gloss clear coat enamel and that will return the luster. The downside is doesnt last a long time, but it is easy to redo.

If you try either of these start somewhere on the wheel where it is least noticible and verify the technique before committing the whole wheel.

122
Being an Az guy, I mainly have been on local lakes like Apache, Pleasant, Canyon, Saguaro, bartlett and Roosevelt. Leaving the depraved life I have lead somehow  I have never been to the Colorado.
 I see on Google earth "big River" and some of the other places mentioned here for popular floats, but was looking for advice on a good place for a newbie to go ? Last thkng I want to do off the bat on our first river trip is run aground or suck some rocks or plain go to a low tide place which sucks.  I will be shaking down my new to me boat over the next few weekends on lakes around here close by to get more familiar first, but the wifey says when are we going to "the river" ?

123
The No Wake Zone / Re: ok guys here we go Need to name the new boat
« on: June 16, 2010, 02:49:33 PM »
spanish fly

chilly pepper

chile pecker

dego red

panama red

doh... Jerry Jeff Walker?




124
The No Wake Zone / Re: ok guys here we go Need to name the new boat
« on: June 16, 2010, 02:26:13 PM »
Flaming Sphinctor?

125
Gelcoat / Paint / Fireberglass Repair / Re: started wet sand and buff
« on: June 15, 2010, 03:09:10 PM »
Really Boss!  F$kn A as we say in the 70's. What make/model sander did you use? Finesse it? (is there onegrade or is that it?) what kind of Wax?  Did you use a mechanical buffer on the wax?

Seriously beautiful.  You could be a motivational speaker.

Pages: 1 ... 3 4 [5] 6

Null

SMFPacks CMS 1.0.3 © 2026