Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Lopes

Pages: 1 [2] 3
26
Random Boat Parts For Sale / Re: Trailer for sale
« on: April 03, 2016, 04:12:25 PM »
I had a 2002 Tige with the same problem no trail. Direct drive and v drive will fit on the same trailer or vice virus


Sent from my iPhone using SoCal Jet Boats

27
Engine Mechanical / Electrical / Re: Bbc 505...?
« on: March 26, 2016, 05:54:24 AM »
It's a stroked 454. I thinks it's about as big as you can get with a standard deck 454. My buddy runs one in a 70 Camero and it flys. Not sure if that helps you


Sent from my iPhone using SoCal Jet Boats

28
Jet Pumps / Re: Droop and ride plate combo?
« on: March 05, 2016, 05:53:51 AM »
I run a droop and ride plate on my miller works perfect. Only pic I had of pump sorry it's not the best.


Sent from my iPhone using SoCal Jet Boats

29
Events / Re: 2016 8th Annual HotBoat & Custom Car Show, Needles, CA Feb 27th
« on: February 04, 2016, 08:12:57 AM »
Thanks just booked the room.


Sent from my iPhone using SoCal Jet Boats

30
Events / Re: 2016 8th Annual HotBoat & Custom Car Show, Needles, CA Feb 27th
« on: February 04, 2016, 05:46:33 AM »
Any suggestions on what hotel to stay at.


Sent from my iPhone using SoCal Jet Boats

31
Projects / Re: Picked up a free 73 miller!
« on: October 31, 2015, 07:58:10 AM »
Welcome to miller family


Sent from my iPhone using SoCal Jet Boats

32
Engines / Engine Parts For Sale / Bbc gen 6 timing cover
« on: September 19, 2015, 02:51:23 PM »
Free if someone needs it. New never installed gasket. Located in indio off 10 freeway.


Sent from my iPhone using SoCal Jet Boats

33
Lower River / Re: Anyone hunting Blythe tomorrow?
« on: September 01, 2015, 05:07:05 AM »
I'm behind oxbow


Sent from my iPhone using SoCal Jet Boats

34
Boat Showcase / Re: 78 Miller First Boat
« on: August 06, 2015, 02:24:51 PM »
X 4 on the miller family


Sent from my iPhone using SoCal Jet Boats

35
The No Wake Zone / Re: Happy 4th of July
« on: July 04, 2015, 02:30:50 PM »
Happy birthday USA


Sent from my iPhone using SoCal Jet Boats

36
The No Wake Zone / Re: Rescue Hal's Boat
« on: June 22, 2015, 02:49:09 PM »
Done. It was not time consuming either


Sent from my iPhone using SoCal Jet Boats

37
Engine Mechanical / Electrical / Re: Dry headers
« on: June 12, 2015, 07:13:29 PM »
I'm going to try and make the big river run it will be our first run. I learned to ski there then learned to drink beer there love that place. If I make it I'm bringing my mom it's her 60th and she love that place


Sent from my iPhone using SoCal Jet Boats

38
Engine Mechanical / Electrical / Re: Dry headers
« on: June 12, 2015, 06:41:10 PM »
Thanks guys I'll go for it. I'll look for you down there heading out tomorrow.


Sent from my iPhone using SoCal Jet Boats

39
Engine Mechanical / Electrical / Re: Dry headers
« on: June 12, 2015, 06:33:56 PM »
I'm waiting on fittings for the new headers and want to get to blythe and try to have fun tomorrow and Sunday


Sent from my iPhone using SoCal Jet Boats

40
Engine Mechanical / Electrical / Dry headers
« on: June 12, 2015, 06:21:28 PM »
Can you run dry header at the river? Are they okay for the motor?

41
Engines / Engine Parts For Sale / Re: WTB: BBC Bassett Headers
« on: May 29, 2015, 04:27:58 PM »
Said I can't load pic.


Sent from my iPhone using SoCal Jet Boats

42
Engine Mechanical / Electrical / Re: Harmonic balancer
« on: April 29, 2015, 06:28:53 PM »
I forgot to thank bbf southwind. You are right they do need to be sent in every year or you void the warranty.

43
Engine Mechanical / Electrical / Re: Harmonic balancer
« on: April 29, 2015, 05:27:55 PM »
Gt, Chad, and flusher thanks for the help. I went with the same balacer just a new one they sent and I'm good. I talked with inovetors west and they kind of talked me out of there balance for my application. Thanks for the reference. Now it's time to get this thing on the water.

44
Engine Mechanical / Electrical / Re: Harmonic balancer
« on: April 26, 2015, 03:55:17 PM »
9hrs later we found the problems. First problem was I didn't put the the the timming gear on all the way. Good news was the timming gear was made in the USA lol. The balancer was bad also, good new is there refunding me and I'll order the one tomorrow that GT recommended. If I get this going I'll see you guys at the Avi be our first jetboat trip. I'll have beer and be in a blue miller boat. Thanks for the help guys.

45
Engine Mechanical / Electrical / Re: Harmonic balancer
« on: April 25, 2015, 03:26:59 PM »
Thanks for the help guys. I'm going to measure everything at my work tomorrow I'll let you know what I find.

46
Engine Mechanical / Electrical / Re: Harmonic balancer
« on: April 25, 2015, 03:00:40 PM »
What balencer do you recommend? I'm open for anything but a TCI rattler

47
Engine Mechanical / Electrical / Re: Harmonic balancer
« on: April 25, 2015, 12:32:20 PM »
I'm getting a dial indicator from work tomorrow. Thanks again. The balancer was made in Australia I gave summit an ear full there will to take it back.

48
Engine Mechanical / Electrical / Re: Harmonic balancer
« on: April 25, 2015, 05:59:49 AM »
It's is a summit SFI approved balancer not china 308$. I've had good luck with them on sbc. But I'm willing to try something dinferent. What one would you recommend. In the pic you can see the gap from the timming cover to the balancer. Thanks for the help

49
Engine Mechanical / Electrical / Re: Harmonic balancer
« on: April 24, 2015, 05:20:05 PM »
I just got my new woodruff key in and installed the balancer. Still have the same problem won't go on straight could my crank be bent? Thanks for the help this is my first jet and I want to get on the water.

50
Engine Mechanical / Electrical / Re: Harmonic balancer
« on: April 13, 2015, 08:01:04 AM »
Yes I used a balancer tool. I'll check and see if the key moved. Thanks

Pages: 1 [2] 3

Null

SMFPacks CMS 1.0.3 © 2026