Damn I take a leave of absense and you became the resident jetboat expert, if that motor checked out good then the project is worth it, do the math on your project and tell us how much you spent. For the record I would take a bahner layup way before a Tahiti layup. Yes I owned a Tahiti, and I absolutley loved it. If I had the coin I would snatch it up just for the motor and if it all checked out I would just flip the whole operation. I love how quick you are to judge, maybe you should just keep hanging out with all the ballers on other forums, oh and for the record there's some guys running massaged pro comp heads make some big numbers...
Sent from my SGH-T959V using Tapatalk
exactly, look at my project and how much work and money is involved. little things here, little things there. shit adds up QUICK!
im quick to judge because i too have my fingers out there searching for a hull and i see whats out there for the coin. id take anything over a tahiti (a $30k hawaii wedding REALLY puts a hitch in my boat plans...), i know im driving a POS you're not the first to point that out. but i sure as hell wouldnt pay close to $3k for a halfass put together unknown condition boat project.
procomp anything is junk. the amount of work needed to put into them to just get everything squared up you couldve just invested into a set of REAL aluminum heads. in the end would you rather have a set of $1500-2k name brand heads or "procomp massaged big number heads"?