Now that the motor is out decided to sand the stringers And fix a couple of parts on the bulk head and re glass the broken parts and glass up the plugs



Sent from my iPhone using SoCalJetBoats mobile app

So after all the headache started to build my rail kit Znd re rig the boat and was able to lower the motor almost 3 inched down from the old location  👍



Sent from my iPhone using SoCalJetBoats mobile app

So I decided to shave more weight and end result is just short of 100 lbs now snd still a bit more to go here the base pics of the front plates I made and used a router to mill out a few parts and clearance the fuel pp and to fit a 90 on it without rotating the fuel pump



Sent from my iPhone using SoCalJetBoats mobile app

Had to prep the bildge next and what a pain but came out ok for the first time



Sent from my iPhone using SoCalJetBoats mobile app

And to be continued


Sent from my iPhone using SoCalJetBoats mobile app

Looking good homey

Sent from my SAMSUNG-SGH-I337 using SoCal Jet Boats mobile app

Thanks fellas and thanks Sean John for having to raise bar lol


Sent from my iPhone using SoCalJetBoats mobile app

Now that the kit is done and the stringers were plugged and glassed over I decided to gel the stringers and bulkhead myself with a few china freight gravity fed guns and it came out pretty cool



Sent from my iPhone using SoCalJetBoats mobile app

Awesome Man! Thats looking great!!

Just curious what gel you used to shoot that,  Is it a single stage deal with the clear and UV stuff? Also did you just put down straight resin on the bulkhead and stringers?

Im wondering because im about at the same point on my Bahner and I was thinking about putting down a coat of resin and on the floors and stringers then doing a similar gel or paint after...

Keep up the good work!!!

Awesome Man! Thats looking great!!

Just curious what gel you used to shoot that,  Is it a single stage deal with the clear and UV stuff? Also did you just put down straight resin on the bulkhead and stringers?

Im wondering because im about at the same point on my Bahner and I was thinking about putting down a coat of resin and on the floors and stringers then doing a similar gel or paint after...

Keep up the good work!!!

I got the stuff from rev Chem in sanfernado. Got hooked up for a steal of a price thru a good friend. The gel has a clear base in it and I also added a uv and extra clear called cover all. You spray it on when the gel gets tacky and it helps with orange peel snd gives it an extra shine to boot


Sent from my iPhone using SoCalJetBoats mobile app

Oops forgot attachment



Sent from my iPhone using SoCalJetBoats mobile app

nice work man.

Looks Awesome, Justin! Good job.
If you lowered the engine 3", what did the driveline look like before? Must have had a hell of an angle.

It was fine Hal but when jim and I reset the intake some angles changed so I have just 1/12 degrees of pin angle so no more rattle of driveline at idle and I'm not gonna say what the intake is set at 😜. Lol it basically went from a 2 degree up angle to nice and straight. Just wis I had extra coin for a jetaway but I hires in the future I will just drill four new holes and weld up the old ones of I don't end getting another boat in the future


Sent from my iPhone using SoCalJetBoats mobile app