BAHNER

« **Reply #25 on:** February 15, 2008, 06:40:23 PM »

Darker?

« **Reply #26 on:** February 16, 2008, 09:09:11 AM »

Hey Rod thanks man

I dont know what it is but i think its the YELLOW that is throwin me off.... Its hard to come up with a good color combo with the colors at hand

Sooooooooo.......... im thinking white seats with blue accents

Sound familiar

I think the boat has enough YELLOW in it , it needs some neutral colors....... What do you guy's think

2sav

« **Reply #27 on:** February 16, 2008, 09:24:02 AM »

How about white seats , blue stripes, yellow trim

That way theres not to much yellow but enough to make it look like it belongs there.

« **Reply #28 on:** February 16, 2008, 05:27:16 PM »

Yesturday i decided to get the Bahner striped and cleaned up before it go's in for new upholstery

ive never seen so much silicon

2sav

« **Reply #29 on:** February 16, 2008, 05:28:51 PM »

Today i found out why the bow is sagging

2sav

« **Reply #30 on:** February 16, 2008, 05:31:05 PM »

This is what they used to brace it

So i cut some wood for a bandaide..... it might not have been the right way of doing it , but it worked

Had to jack it back up

2sav

« **Reply #31 on:** February 16, 2008, 05:34:07 PM »

Well i guess after all the years of racing , something is gonna give

Heres what i have so far, i will finish it up tomorrow

Now the big question , what do i use to seal this up again

Im getting new carpet and dont want to have to pull it up if it leaks

2sav

« **Reply #32 on:** February 16, 2008, 05:49:55 PM »

good job Bahner boy.....

« **Reply #33 on:** February 16, 2008, 05:55:43 PM »

Quote from: HDriderTH on February 16, 2008, 05:49:55 PM

good job Bahner boy.....

Thanks HD, now how do i seal it up

2sav

« **Reply #34 on:** February 16, 2008, 06:22:52 PM »

Does it leak? Maybe pour some water in there and see if any drips out. If the bottom is epoxied it shouldn't leak. Is the bottom of the boat covered up the bolts?

« **Reply #35 on:** February 16, 2008, 06:28:35 PM »

Its all cracked and brittle sooo...... i wanna fix it.....i will try the water tomorrow. Who know's maybe it will grow

2sav

« **Reply #36 on:** February 16, 2008, 09:23:02 PM »

Quote from: 2savage4you on February 16, 2008, 06:28:35 PM

Its all cracked and brittle sooo...... i wanna fix it.....i will try the water tomorrow. Who know's maybe it will grow

2sav

I've heard you use marine bondo for that shinizle

« **Reply #37 on:** February 17, 2008, 06:50:23 AM »

if you want to patch it quick and get it doen with.....marc and i tried using some of that bondo glass when we filled in the gauge holes on the liberty....that stuff is nice....but kicks REAL quick.....make several small batches instead of one big one.

if you got time ...use some of the sea goin poxy putty....the downside is that it takes a day to cure.

how was the left foot pedal mounted? i got a setup like that, but theres nothing to mount the left pedal to. I need some ideas.

« **Reply #38 on:** February 17, 2008, 06:56:25 AM »

Quote from: Brad @ SoCalJetBoats.com on February 17, 2008, 06:50:23 AM

if you want to patch it quick and get it doen with.....marc and i tried using some of that bondo glass when we filled in the gauge holes on the liberty....that stuff is nice....but kicks REAL quick.....make several small batches instead of one big one.

if you got time ...use some of the sea goin poxy putty....the downside is that it takes a day to cure.

how was the left foot pedal mounted? i got a setup like that, but theres nothing to mount the left pedal to. I need some ideas.

Where do i find the poxy putty online?

I will take a pic of how it was mounted

Thanks.

2sav

« **Reply #39 on:** February 17, 2008, 07:01:20 AM »

CP:

http://www.cpperformance.com/SearchResult.aspx?CategoryID=466

unless your mounting intakes...1 order of this stuff goes a long way.

« **Reply #40 on:** February 17, 2008, 07:05:12 AM »

Thanks, i will see if i can get it here first but i kinda doubt it , thats why i wanted the online info

2sav

« **Reply #41 on:** February 17, 2008, 07:06:33 AM »

Quote from: Brad @ SoCalJetBoats.com on February 17, 2008, 06:50:23 AM

bondo glass....that stuff is nice....but kicks REAL quick.

Brad, you got that right. Almost cures before you get it mixed.

« **Reply #42 on:** February 17, 2008, 08:53:08 AM »

I've bought sea goin poxy putty at my local boat shop. If you dont want to wait for shipping I would check that first, its pretty common stuff.

« **Reply #43 on:** February 17, 2008, 10:03:48 AM »

I believe Walmart carries Sea Goin epoxy

« **Reply #44 on:** February 17, 2008, 10:44:06 AM »

Pull the fin out and set it back in with the poxy putty . Hardest part is going to be pulling it out . When that shit is dry . It is in there for good . Dont buy the smallest one they have . It almost wasnt enough for mine .

-beerjet-

« **Reply #45 on:** February 19, 2008, 04:46:06 PM »

Got the floor all ready for carpet. It looked like they used silicon on the whole floor. Tomorrow i will tackle the bilge area , pull the line and rails. Im hoping it will clean up good enough to just lay down some resin but if not, it gets the bed liner........F-IT

Put the bulkhead back in today. I found the bow eye was ready to fall out, Man what a bitch , and im closter fobick (sp)

But its tight again.

I forgot to put the floaty things back in before glassing it in

2sav

« **Reply #46 on:** February 19, 2008, 04:48:21 PM »

Hey Brad im thinking about having some stickers made that say " NO STEP" for my fiberglass fenders..

Have any ideas

2sav

« **Reply #47 on:** February 19, 2008, 05:21:33 PM »

WOW you moved really quick on this! The patch jobs look pretty darned good. Good luck with that fin, hope you're having fun, looks like we'll be seeing you in June.

« **Reply #48 on:** February 19, 2008, 06:02:12 PM »

Hey thanks man

Im like a kid in the candy store with this boat, i just love the shit out of it.(is that wrong,do i need therapy)

But anyway it will be there. it wont be the fastest or the best looking boat, but it will be there, if i can help it

2sav

« **Reply #49 on:** February 19, 2008, 08:22:38 PM »

Keep up the good work 2sav. Now finish this one would ya

hotrod56cars

2savage4you

propless

2savage4you

2savage4you

2savage4you

2savage4you

HDriderTH

2savage4you

pw_Tony

2savage4you

HDriderTH

Brad @ SCJB

2savage4you

Brad @ SCJB

2savage4you

GAWnCA

76 Bonneville

pw_Tony

beerjet

2savage4you

2savage4you

UNDONE

2savage4you

flytime