BAHNER

« **Reply #375 on:** June 29, 2008, 06:52:23 AM »

After what boost put up there

I realized i didn't post up the newer pics.......
Pump is done, all brand new cables are hooked up and ready to go play

The seats are installed along with the side panels.....Done ......

Still looks the same, but one less thing do get done...... Went to Wallmart a few days ago and the wife picked up all new wire and lights for the trailer......Soooo.......that will be all done and ready to roll in a few days......

2sav

« **Reply #376 on:** June 29, 2008, 07:55:12 AM »

Looking REALLY good 2sav. You gotta feel good about finally getting this biatch done. Sounds like you will be getting her wet soon. Way to go.

Bob

« **Reply #377 on:** June 29, 2008, 08:04:51 AM »

Quote from: flytime on June 29, 2008, 07:55:12 AM

Looking REALLY good 2sav. You gotta feel good about finally getting this biatch done. Sounds like you will be getting her wet soon. Way to go.

Bob

any day know is that what i'm hearing you'll be like me know the boats done what do i do with all this free time, hopefully in the water good luck

« **Reply #378 on:** June 29, 2008, 08:05:51 AM »

Quote from: flytime on June 29, 2008, 07:55:12 AM

Looking REALLY good 2sav. You gotta feel good about finally getting this biatch done. Sounds like you will be getting her wet soon. Way to go.

Bob

Yeah, thanks to the good people/friends on this site , helping me out.... Man im stoked

She's gonna be getting wet sooner than expected.... I will be posting a video of the first time i start her and the first run....... This is too bitchen.....

2sav

« **Reply #379 on:** June 29, 2008, 08:08:07 AM »

Quote from: boost on June 29, 2008, 08:04:51 AM

any day know is that what i'm hearing you'll be like me know the boats done what do i do with all this free time, hopefully in the water good luck

I have access to three boat ramps behind my place....... ten minutes its in the water

Yeah i will be there........

2sav

« **Reply #380 on:** July 01, 2008, 03:24:39 PM »

Well i went out and got the trailer almost finished up to be road ready

Before....

After....

Also get my shim kit for the flexplate, so its all together now!

Its hotter than hell here, and i aint doing no mo today, its beer time

2sav....Peace out

« **Reply #381 on:** July 01, 2008, 04:58:01 PM »

what in the water for the 4 of July work on the boat and drink get her done great job

« **Reply #382 on:** July 01, 2008, 05:17:05 PM »

Quote from: boost on July 01, 2008, 04:58:01 PM

what in the water for the 4 of July work on the boat and drink get her done great job

I have a tow ski bar for an BBC great shape its your if you need it

« **Reply #383 on:** July 02, 2008, 08:49:32 AM »

Quote from: boost on July 01, 2008, 05:17:05 PM

I have a tow ski bar for an BBC great shape its your if you need it

Thanks. I wasn't shure i was going to use one or not , but i hear they are good to tie up to cause i can't beach the boat with the turn fins in it

2sav

« **Reply #384 on:** July 02, 2008, 09:23:52 AM »

Quote from: 2savage4you on July 02, 2008, 08:49:32 AM

Thanks. I wasn't shure i was going to use one or not , but i hear they are good to tie up to cause i can't beach the boat with the turn fins in it

2sav

By not beaching the boat, you'll save the bottom!!! That sand and rock really gouge through a hull.... Think of it as 36 grit sand paper rubbing the bottom every time you beach and every time another boat goes by and makes a wake.

« **Reply #385 on:** July 02, 2008, 09:59:05 AM »

Quote from: GAWnCA on July 02, 2008, 09:23:52 AM

By not beaching the boat, you'll save the bottom!!! That sand and rock really gouge through a hull.... Think of it as 36 grit sand paper rubbing the bottom every time you beach and every time another boat goes by and makes a wake.

Maybe i said it wrong, but i have no intentions of beaching my boat, i couldn't if i wanted to.... I was looking for another way to tie her up, and a ski tow makes perfect sense

I see these boats ties up in the bow and transom to keep them from moving when it gets in tight spots (Lotsaboats) WooHoo

Everything you posted above, makes perfect sense......

thanks....

2sav

« **Reply #386 on:** July 02, 2008, 10:29:26 AM »

I took that ski tow off my boat since I don't plan on towing anyone but still wanted to have a tie spot, just in case so I went with this http://shopping.rexmar.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=skitowstransombil from Rex Marine. I may add another and then use them for tieing to and also use as the tie down for the tailer tie downs.

« **Reply #387 on:** July 02, 2008, 10:32:56 AM »

The Bahner is a really LIGHT lay up and i would have to reinforce it with some wood........But i would not feel comfy about it, i think im better off with a ski tow..... But thanks for the info

2sav

« **Reply #388 on:** July 02, 2008, 11:01:35 AM »

Its time to make a list...... of what needs to be done
Intake gaskets........Done, Thanks Ryan
Carb.......................Done
New u joints............Can wait till later
oil + filter................Done
Forward / reverse cable......Done
Battery
Header gaskets..................Done
Wiring harness
Misc...nutz & bolts
Alternator and bracket
Bassett "T"...........................Thanks Ralph

Alt Pulley
Plumbing/ hoses fittings & accessories...Still working on it
fuel filter................................D one
New ignition....Possibly MSD.....NOT!!.....for now im Getting a cheap one from Ebay
plugs/wires................................Done
Bilge pump
Boat registration
Trailer registration
new trailer tires , possibly bearings .......It can wait........

Im sure that is not all of it , but its a start

Just updating my list of to do's

2sav

« **Reply #389 on:** July 10, 2008, 09:12:03 PM »

Quote from: 2savage4you on July 02, 2008, 11:01:35 AM

Its time to make a list...... of what needs to be done
Intake gaskets........Done, Thanks Ryan
Carb.......................Done
New u joints............Can wait till later
oil + filter................Done
Forward / reverse cable......Done
Battery
Header gaskets..................Done
Wiring harness
Misc...nutz & bolts
Alternator and bracket
Bassett "T"...........................Thanks Ralph
Alt Pulley
Plumbing/ hoses fittings & accessories...Still working on it
fuel filter................................D one
New ignition....Possibly MSD.....NOT!!.....for now im Getting a cheap one from Ebay
plugs/wires................................Done
Bilge pump
Boat registration
Trailer registration
new trailer tires , possibly bearings .......It can wait........

Im sure that is not all of it , but its a start

Just updating my list of to do's

2sav

is the boat in the water yet

« **Reply #390 on:** July 10, 2008, 09:33:51 PM »

You really don't wanna go there do you?

« **Reply #391 on:** July 10, 2008, 09:45:20 PM »

Quote from: GlassCutter on July 10, 2008, 09:33:51 PM

You really don't wanna go there do you?

A little motivation trying to help the guy out

« **Reply #392 on:** July 11, 2008, 12:19:37 AM »

Here ya go Steve....

http://orangecounty.craigslist.org/boa/745983675.html

A lil motivation for you.

« **Reply #393 on:** July 11, 2008, 04:55:14 AM »

ya but it's a TUNNEL BOTTOM BAHNER!

« **Reply #394 on:** July 11, 2008, 07:04:06 AM »

I hope my thread dosent go to 16 pages with out being done

« **Reply #395 on:** July 11, 2008, 08:02:51 AM »

Quote from: bkplesh on July 11, 2008, 04:55:14 AM

ya but it's a TUNNEL BOTTOM BAHNER!

but in none of the pictures can u see the tunnel bottom

« **Reply #396 on:** July 11, 2008, 08:17:06 AM »

NEW LIST

1. Put boat together
2. Put boat in water

« **Reply #397 on:** July 11, 2008, 08:24:09 AM »

Quote from: HDriderTH on July 11, 2008, 08:17:06 AM

NEW LIST

1. Put boat together
2. Put boat in water

I say sell it

and start over

« **Reply #398 on:** July 11, 2008, 01:04:32 PM »

I see you guy's are having some fun huh

2sav

« **Reply #399 on:** July 11, 2008, 01:24:00 PM »

Quote from: 82daytona on July 11, 2008, 07:04:06 AM

I hope my thread dosent go to 16 pages with out being done

It probably wont, since you pay someone to do your work for you

By the way, how's the Daytona

2sav

2savage4you

flytime

BOOST

2savage4you

2savage4you

2savage4you

BOOST

BOOST

2savage4you

GAWnCA

2savage4you

GAWnCA

2savage4you

2savage4you

BOOST

GlassCutter

BOOST

OC2Vegas

bkplesh

82daytona

OC2Vegas

HDriderTH

82daytona

2savage4you

2savage4you