I cant get down there right now

2sav

do you still need pics of my stuff?

do you still need pics of my stuff?

What I have is just a bunch of stuff left over, not a 4pt.
He may need to finish his project.

Well i cant say ive made any progress lately and its starting to get to me, so i started to strip the old paint off the pump so i could give it a fresh look for the new boat in progress. I dont know if its right or wrong but i used automotive paint stripper, the lazy mans sand paper.

 Next i think i will start to sand the saddle tanks, want to bring some shine back to it.  You know make it purdy

now i got to finish the engine box and paint the transome, Sand some more on the floor and then put the pump back into it and work forward from there.

Everytime i work on this thing i feel like im lighting a candle in the wind. Not getting nothing done.

Anybody else feel like that? its frustrating

Check out my pic of the pump, I used three cans so far and have to go get more. Paint is some thick chit!  and i got the dremel out last night to shine up the impeller   No im not tweeking

2sav

I finally got my motor today no more stressing. Jim came through for me and its appreciated

Now the fantasy will have a BBF 460. Thats right you Ford fans there's gonna be one more out there
 Started to tear it down and found some things wrong, It wont turn over all the way so i figured its the timing chain no biggie. Nope it looks like it blew a gasket and then just started to rust up on the top of the cylinder. Looks like we are going to have to punch it out. But thats fine with me i planned on new pistons and rods anyways, anyone know where they have the best deals on pistons and rods  besides Ebay Ive been looking at some Skat rods pretty cool and not to expensive, thats a plus.

 here is some pic's


2sav

Stock rods should be OK, unless you have something up your sleeve? 

Stock rods should be OK, unless you have something up your sleeve? 

You ever hear of "H BEAM"


2sav

Judging by those bearings , I'd get that crank turned also!

Ebay parts....

year of block dont matter, but remember
CHEAP ISN'T GOOD AND GOOD ISN'T CHEAP
stay away from e-bay

When i look to buy pistons, They want a year?

Maybe thats just a common question that they are so used to asking
Believe me Ralph this aint gonna be cheap
2sav

I meant maybe you could sell half the stuff you aren't gonna use on ebay 

I know the pic is small but take a good look

Thats a trash can filler


2sav

ok drop the 1,800 on a good stroker kit and be done, where are you looking to buy pistons, what cr do you want, flat top or dish, dome maybe?? you ask 's but dont elaborate on what it is you are trying to do, other than buy .030 pistons
how many ci do you want

Simple i just want a good 0.30 over piston flat top maybe 8-9.1 is all i need

Ive called around the local parts house and i get whats it in what year is it?

Im not trying to build a race motor (wouldnt that be nice)J/K

Just trying to build a good reliable engine, Hell maybe i want to run circle's too


2sav

forged, cast or hyper,

Hyper would be bitchen but since im not going wild i will stick with cast


2sav

2 SAV-

Did you call Jim yet? I'm telling you man, if you need BBF stuff, in good shape, or new, he's got the goods and his prices are unfreaking real.

Plus he's a helluva guy 

I need a number

I found some "speed pro" pistons from Summit  hhhhhhmmmmmmmmmm


2sav