Jus called the guy w/ the heads, left message should have them tonight. Called dyno flow, the have a HUGE inventory of push rods, can hook us up same day.

do not use dummy flow i despise that guy he is a rip off moron

my dad used to work with him before he opened that place so he figured he would use him for building a nice motor for his nova well the a-hole used all china knock off crap...put the geard drive in wrong which messed up a dart m block <~~~expensive...oh and my favorite my dad tried putting the distributor in the motor and couldnt get it to go in so he shines a flashlight into the hole for the distributor hole and sees the tip of a screwdriver...he pulls the intake off its a snap on screwdriver and it is perfect length to fit in that valley this screwdriver is by no means small...how do you miss that...this guy will take a box of name brand push rods and put china knock offs in it and charge you full price...im not making this crap up he has lost almost all local buisness from local racers and relies on ebay, just read his feedback on ebay

when you have 50 or more connectors in a wire harness, you need to fix it 

Plesh I always look forward to reading your posts.   

where do you find one of those billet steering wheel stand offs ?

Rex Marine

Naaaahhhhhhhhhh , that wont rub through the plastic casing   

-beerjet-

I just don't get you Beerjet. You post sh!t up not to help but just to critisize. Usually, when you refer to my sh!t,  you have no idea WTF you're talking about. You read through a thread about Alcohol vs. Gas and post up you don't care what I think, then why in the phuk are you reading it? Why do you feel the need to post up you don't care what I think? Next up, you're telling me I'm going about my project all wrong, that nothing I have is correct for my app, then you ask me a bunch of questions about what I have because you don't know what I have. Now, you're clowning the stupid little bracket I made to hold up a cable off of my driveshaft, you don't offer any advice, you just clown the sh!t, and you still have no idea what the phuk you are talking about. Then to top it all off, you send me cool pix and text messages as if you like me as a friend or as a person. WTF? I don't give a phuk what the problem is, but if you have a problem with me then SPEAK IT. At Parker last year I helped you and anyone else out that I could help out, we've never seen each other since the AVI last year so once again, WTF?

For the bracket to wear through the cable, the cable would have to move within the bracket thereby causing wear, if the cable can't move in the bracket then there isn't going to be any wear. The cable doesn't move. There's no reason to allow the cable's housing to move. The cable is not being pinched. The clamp for the cable is of the correct diameter for the cable it's being used to clamp. Maybe I'm wrong, but I won't know if it's wrong until it fails or until someone who knows offers me advice. But if all I get is clowns looking for a laugh and a high five from thier buddies, phuk 'em all. 


Have a nice day!




On a different note, I found a guy that is very local to me, he runs a jet drive tunnel hull, also runs a MFI, runs a BBC, also has achieved what I am trying to achieve, the guy is really nice and really helpfull who does all of his own work, he does pump and engine work for race boats, builds sand cars for a living, this could be a HUGE advantage for me in completeing my goal. The only problem I can foresee is how in the hell do you repay a guy back for giving you valuable hard to find information?

beer i love that stuff

i love it

On a different note, I found a guy that is very local to me, he runs a jet drive tunnel hull, also runs a MFI, runs a BBC, also has achieved what I am trying to achieve, the guy is really nice and really helpfull who does all of his own work, he does pump and engine work for race boats, builds sand cars for a living, this could be a HUGE advantage for me in completeing my goal. The only problem I can foresee is how in the hell do you repay a guy back for giving you valuable hard to find information?

Then to top it all off, you send me cool pix and text messages as if you like me as a friend or as a person. WTF? I don't give a phuk what the problem is, but if you have a problem with me then SPEAK IT. At Parker last year I helped you and anyone else out that I could help out, we've never seen each other since the AVI last year so once again, WTF?

WTF ? It's the internet Rod , thats WTF?

People call me gay and slow all the time , Do I care . No . Why ,

BECAUSE IT'S THE INTERNET ! . Thats why .

Besides , Can photochopped images of your boat to look like a freakin airplane really be considered post worthy in a projects forum . I have gone back and read every single page . The only thing you've done successfully is burn up a motor for some undisclosed reason , BTW .
Oh yeah , and you've bought some parts .

You told me to go back and read it , so I did . You really shouldnt let this "internet" get you all worked up 

-beerjet-

Don't you suppose going slower longer might entail a motor that runs longer cheaper and more hassle free.  Tuning every trip gets old.  Just trying to make your head pop.   How am I doing so far? 

FI with no bugs is the shiz.  Good luck Grasshopper.