good luck with those.....start saving up now!

yes the framing on top is a sun deck would like to lay in the sun after i go around the lake anyway the guy in brought if from took the windsheild off and cut the top from the sitting area to the back and put cardboard under that so i took that out and redone that with resin and mesh now getting ready to flip the boat and sand paint up to the rub rail then wet sand wheel then flip back over then finish the top then do the int. by the way i'm doing this by myself the paint body work then the wife on the int the plan is to paint this a very B R I T E   Y E L L O W INT SHOULD BE A OFF WHITE AND YELLOW NOT SURE OF THE CARPET. should take to long just got the vette done so now here comes the boat YES been waiting for that

Does anybody know if this is a 1/4 stringer boat?

got pic  now does anyone know if this a 1/4 stringer boat

is this a easy fix the stringers

thanks will i need to do what the others do like putting two stands at the back and one in the front to replace the stringers and they look like 2x6  again thank soooo much for your help this will make it fast to get the boat up and running

thanks

well here is the bottom of the sanding and going to ureth primer sould be done by the weekend and hopefully paint bottom within a couple of weeks