Edlebrock heads and more 455 olds

« **Reply #25 on:** March 11, 2015, 06:59:30 AM »

Nice glws on olds parts. Hope to see you out there bud!

"RTCP"

« **Reply #26 on:** March 11, 2015, 07:25:14 AM »

Quote from: MorePower on March 11, 2015, 06:44:39 AM

Would you happen to have the dyno sheet? And bummer your selling it man. Would have been rad to see it all together

Dyno sheet?

LOL

Claims of 600+ HP on a stock lower end with no oil mods!!! ... Laughing so hard, my side hurts.

Righty-O tiger!!

Sent from my iPhone using SoCal Jet Boats

« **Reply #27 on:** March 11, 2015, 07:34:07 AM »

Quote from: lifted250 on March 11, 2015, 06:43:09 AM

It not really that hard to do to high hp just takes money on an olds stock olds are 325 hp 455 ft toqure the motor was built to mondello spec mine is 625 hp already talk to Lynn at mondello if I change the rods and cam and it will turn 6200

Sent from my iPhone using SoCal Jet Boats

Think you might wanna rethink your strategy here. Rods and cam can't be more than 1700 and you will be making around 725-750hp if your turning an AB 6200. Not bad for a pump gas motor.

"RTCP"

« **Reply #28 on:** March 11, 2015, 07:35:24 AM »

How do u know what I had done since u saw me lasts there is oil restricking 1234 main mondello oil pump as well as restricking push rods so get off ur high horse u don't know as much as u think u better call Lynn at mondello before u run ur mouth

Sent from my iPhone using SoCal Jet Boats

« **Reply #29 on:** March 11, 2015, 07:40:46 AM »

Quote from: lifted250 on March 11, 2015, 07:35:24 AM

How do u know what I had done since u saw me lasts there is oil restricking 1234 main mondello oil pump as well as restricking push rods so get off ur high horse u don't know as much as u think u better call Lynn at mondello before u run ur mouth

Sent from my iPhone using SoCal Jet Boats

Call Lynn at mondello? Why would I do such a thing?

600+ horse on a stock nodular crank? And hydraulic flat tappet cam??
Block oiling mods, not component mods!

I'm willing to bet both my arms you didn't pay to dyno your engine, and more so you don't have 600+ horses

....maybe a few sick donkeys

Sent from my iPhone using SoCal Jet Boats

« **Reply #30 on:** March 11, 2015, 07:45:33 AM »

Thanks cap I prolly do that just up in air about how long it will last I have a 454 needs to be board So but I put a lot into the olds already so to do that I'll get a mondello harden crank harden bearing and cam Lynn said if I do that I'll be fine to turn more then 6200 just how long do u think it will last

Sent from my iPhone using SoCal Jet Boats

« **Reply #31 on:** March 11, 2015, 07:50:36 AM »

Lmao u build ur olds and I'll put mine up against its lets see who will go faster Lets do it I should have my boat back by memorial day weekend I'll put money on my motor see u are going off what u though u knew which is not jack shit about my motor

Sent from my iPhone using SoCal Jet Boats

« **Reply #32 on:** March 11, 2015, 07:53:57 AM »

Quote from: lifted250 on March 11, 2015, 07:45:33 AM

Thanks cap I prolly do that just up in air about how long it will last I have a 454 needs to be board So but I put a lot into the olds already so to do that I'll get a mondello harden crank harden bearing and cam Lynn said if I do that I'll be fine to turn more then 6200 just how long do u think it will last

Sent from my iPhone using SoCal Jet Boats

not sure. But your asking for a lot. My blower motor barely turned 6200 with an AB. I'm not a motor builder so can't make you any promises.

"RTCP"

« **Reply #33 on:** March 11, 2015, 07:57:21 AM »

Quote from: capogniracing on March 11, 2015, 07:53:57 AM

not sure. But your asking for a lot. My blower motor barely turned 6200 with an AB. I'm not a motor builder so can't make you any promises.

"RTCP"

His alarm clock hasn't gone off this morning, he's still dreaming in lala land! 👍😎

Sent from my iPhone using SoCal Jet Boats

« **Reply #34 on:** March 11, 2015, 08:04:52 AM »

Funny guy I just not messing around

Sent from my iPhone using SoCal Jet Boats

« **Reply #35 on:** March 11, 2015, 08:09:01 AM »

Quote from: RushinEliminator17 on March 11, 2015, 07:25:14 AM

Dyno sheet? LOL

Claims of 600+ HP on a stock lower end with no oil mods!!! ... Laughing so hard, my side hurts.

Righty-O tiger!!

Sent from my iPhone using SoCal Jet Boats

Harder than when you took my money and built me a half ass moto that spun a bearing?

« **Reply #36 on:** March 11, 2015, 08:10:10 AM »

Quote from: lifted250 on March 11, 2015, 08:04:52 AM

Funny guy I just not messing around

Sent from my iPhone using SoCal Jet Boats

Well get serious and we will see you Memorial Day! 👍

"RTCP"

« **Reply #37 on:** March 11, 2015, 08:12:28 AM »

Quote from: Handi-Crack on March 11, 2015, 08:09:01 AM

Harder than when you took my money and built me a half ass moto that spun a bearing?

Ran great when you and I went out!!
Wish I could redesign an engine to run with no water! Now that would be a break thru technology!

Sent from my iPhone using SoCal Jet Boats

« **Reply #38 on:** March 11, 2015, 08:19:50 AM »

You plumed it ran the water lines so guess mine was your prototype and that idea didn't work out.

« **Reply #39 on:** March 11, 2015, 08:22:57 AM »

Easy...... Boy's this can be settled on the water real easy.

Sent from my iPhone using SoCal Jet Boats

« **Reply #40 on:** March 11, 2015, 08:28:49 AM »

Quote from: Handi-Crack on March 11, 2015, 08:19:50 AM

You plumed it ran the water lines so guess mine was your prototype and that idea didn't work out.

Can't get water into the engine and thru the plumbed lines when you got grass in your pump!
Should I refer you back to that post you wrote when it happened? I outlined everything there for you!

Did you pay for resize rods ? Did you pay for new pistons and block machining? ... Didn't think so...

And remember what I told you would happen?

Sent from my iPhone using SoCal Jet Boats

« **Reply #41 on:** March 11, 2015, 08:44:04 AM »

Pump was never glogged so let's not try that excuses agian. I went off what you said could as the builder I could get away with and if you new it would blow that shows the kind of person you are to take someone's money when you knew it wouldn't work.

Already working on a new motor with a great bunch of guys so I'll be on the water and at meets.
Back to work now and let's see you run matts boat be fun to watch.

« **Reply #42 on:** March 11, 2015, 08:48:34 AM »

Quote from: Handi-Crack on March 11, 2015, 08:44:04 AM

Pump was never glogged so let's not try that excuses agian. I went off what you said could as the builder I could get away with and if you new it would blow that shows the kind of person you are to take someone's money when you knew it wouldn't work.

Already working on a new motor with a great bunch of guys so I'll be on the water and at meets.
Back to work now and let's see you run matts boat be fun to watch.

Really?
How many things did I tell you wouldn't work??
- fiberglass bow tank
- fuel pump run off off tach power supply
-janky dash wiring

What was your response to it all?? Same as what I told you about engine-
I just wanna get it going! And I will be gentle on it...

Sent from my iPhone using SoCal Jet Boats

« **Reply #43 on:** March 11, 2015, 08:56:50 AM »

You got it guy you the man

« **Reply #44 on:** March 11, 2015, 09:06:21 AM »

Quote from: Handi-Crack on March 11, 2015, 08:56:50 AM

You got it guy you the man

👍

Now back the OP's regularly scheduled comedy program!!

Sent from my iPhone using SoCal Jet Boats

« **Reply #45 on:** March 11, 2015, 09:08:04 AM »

Id like to take that oil pan off your hands...

« **Reply #46 on:** March 11, 2015, 10:47:52 AM »

Any porting done to the heads?

Sent from my iPhone using SoCalJetBoats

« **Reply #47 on:** March 11, 2015, 10:59:30 AM »

Minor

Sent from my iPhone using SoCal Jet Boats

« **Reply #48 on:** March 13, 2015, 09:09:34 AM »

So I am going to not sell and build a sick olds just show u that I will eat chevy up 👍

Sent from my iPhone using SoCal Jet Boats

« **Reply #49 on:** March 13, 2015, 09:46:04 AM »

👍 gonna be sweet to see a really fast boat with an olds

"RTCP"

capogniracing

RushinEliminator17

capogniracing

lifted250

RushinEliminator17

lifted250

lifted250

capogniracing

RushinEliminator17

lifted250

Handi-Crack

capogniracing

RushinEliminator17

Handi-Crack

jimpen

RushinEliminator17

Handi-Crack

RushinEliminator17

Handi-Crack

RushinEliminator17

Wakedodger

Bunger

lifted250

lifted250

capogniracing