Null


Pages: 1 [2]  All

2savage4you

  • Karma: +14/-1
Re: place diverter and handle used
« Reply #25 on: April 06, 2009, 05:03:57 PM »
Quote from: 76NORDIC on April 06, 2009, 04:23:27 PM
You know I had asked about the grinding once before on a thread here ???  Didnt sound like a good idea to do so ??? ???    So what up, and NO 2sav its not cause the dizzy is in the RIGHT place ;D ;D ;D


When i got my Bahner either it had a tiller arm , or it is the one Skip picked up for me that was ground back a bit........

I noticed that the nozzle went way up and if it ever would have got wet, it would of thrown some killer roost ;D

thats all im saying :sly:


2savs law.....DIZZY IN BACK >:D
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

electrowoman

  • Karma: +1/-0
Re: place diverter and handle used
« Reply #26 on: April 07, 2009, 02:12:59 AM »
Could you take a picture from the same angle you took the down shot?  It doesn't look
to me like the grinder is going to get you much more travel till the arm hits.

How much up angle does it have now?  That's why I'd like to see the other picture.

How much HP do you need for a goood roost?  What are you running?  CHEVY  :sly:
« Last Edit: April 07, 2009, 02:16:39 AM by electrowoman »
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Marcsrollin

  • Karma: +33/-0
Re: place diverter and handle used
« Reply #27 on: April 07, 2009, 11:04:16 AM »
Quote from: 2savage4you on April 06, 2009, 05:03:57 PM

2savs law.....DIZZY IN BACK >:D

That's not what you were saying when you owned a ford! :screwy:
My guss is you like something elese in the back!  >:D
Logged
  • Boat #1: 1978 TX-19 Youngblood
  • Boat #2: 1994 24 foot Sundancer Pontoon
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Taco'd "a person or people that show up with one lake lice and a family of 50 and cram 3 people at a time on it with no disregard to boating rules or ethics. Usualy crap in toilets and throw shit paper in trash cans. Hang out at the boat ramp like its a swimming hole. Have zero insurance on anything they own and dont give two shits less about your property."

2savage4you

  • Karma: +14/-1
Re: place diverter and handle used
« Reply #28 on: April 07, 2009, 11:15:21 AM »
Quote from: Marcsrollin on April 07, 2009, 11:04:16 AM
That's not what you were saying when you owned a ford! :screwy:
My guss is you like something elese in the back!  >:D

Dude...... Seriously , put down the beer and sandwich and use two hands when typing :D

I got a lil somethin for ya >:D
http://www.hookedonphonics.com/hooked-on-spelling


Oh and i never owned a Ford :sly:
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Marcsrollin

  • Karma: +33/-0
Re: place diverter and handle used
« Reply #29 on: April 07, 2009, 11:21:13 AM »
Quote from: 2savage4you on April 07, 2009, 11:15:21 AM
Dude...... Seriously , put down the beer and sandwich and use two hands when typing :D

I got a lil somethin for ya >:D
http://www.hookedonphonics.com/hooked-on-spelling


Oh and i never owned a Ford :sly:

Hey , get it right it's a burrito not a sandwich!
Logged
  • Boat #1: 1978 TX-19 Youngblood
  • Boat #2: 1994 24 foot Sundancer Pontoon
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Taco'd "a person or people that show up with one lake lice and a family of 50 and cram 3 people at a time on it with no disregard to boating rules or ethics. Usualy crap in toilets and throw shit paper in trash cans. Hang out at the boat ramp like its a swimming hole. Have zero insurance on anything they own and dont give two shits less about your property."

crewchief22

  • Karma: +66/-0
Re: place diverter and handle used
« Reply #30 on: April 07, 2009, 12:23:36 PM »
A burrito is a sandwich when you're that close to TJ  ;D
Logged
  • Boat #1: '77 Hondo Pantera GT Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
"Racing is life!  Anything that happens before or after, is just waiting"    Steve McQueen

The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?

bertus

  • Karma: +0/-0
Re: place diverter and handle used
« Reply #31 on: April 07, 2009, 01:49:07 PM »
running a ford 460.  there is barely any upward angle.  ill take a pic when i get home and post it
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

bertus

  • Karma: +0/-0
Re: place diverter and handle used
« Reply #32 on: April 10, 2009, 11:29:46 AM »
sorry it took so long to get the picture up but here is a side view pic with the diverter all the way up. 
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Marcsrollin

  • Karma: +33/-0
Re: place diverter and handle used
« Reply #33 on: April 10, 2009, 01:26:18 PM »
Thats not that far up at all!! I would seriously get the grinder out!
Logged
  • Boat #1: 1978 TX-19 Youngblood
  • Boat #2: 1994 24 foot Sundancer Pontoon
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Taco'd "a person or people that show up with one lake lice and a family of 50 and cram 3 people at a time on it with no disregard to boating rules or ethics. Usualy crap in toilets and throw shit paper in trash cans. Hang out at the boat ramp like its a swimming hole. Have zero insurance on anything they own and dont give two shits less about your property."

IRRebel

  • Karma: +16/-0
Re: place diverter and handle used
« Reply #34 on: April 10, 2009, 01:35:35 PM »
Quote from: Marcsrollin on April 10, 2009, 01:26:18 PM
Thats not that far up at all!! I would seriously get the grinder out!

Kinda weird. I don't know much about diverters, so I checked the hydraulic unit on the Biesenmeyer just now, goes up a little further than yours, until the forward reverse bucket handle hits the tiller arm. Your' looks to be a good 1/2 inch from the tiller arm.

Somethings wrong, adjustments?? hellifiknow.

Ray
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
"Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways totally worn out shouting 'Holy Shit what a ride!"---Crewcheif22 AKA Keith

Marcsrollin

  • Karma: +33/-0
Re: place diverter and handle used
« Reply #35 on: April 10, 2009, 02:10:18 PM »
Time to get the grinder, a can of white spray paint and  a 30 pack of beer and do some re-engineering!  ;D
Logged
  • Boat #1: 1978 TX-19 Youngblood
  • Boat #2: 1994 24 foot Sundancer Pontoon
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Taco'd "a person or people that show up with one lake lice and a family of 50 and cram 3 people at a time on it with no disregard to boating rules or ethics. Usualy crap in toilets and throw shit paper in trash cans. Hang out at the boat ramp like its a swimming hole. Have zero insurance on anything they own and dont give two shits less about your property."

bertus

  • Karma: +0/-0
Re: place diverter and handle used
« Reply #36 on: April 10, 2009, 05:53:37 PM »
thats kinda what i figured.  i just dont wanna ruin it or weaken the strength/performance of it but if you guys have done it so can i.  i will have to grind the sides all the way around. 
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

OC2Vegas

  • Karma: +12/-0
Re: place diverter and handle used
« Reply #37 on: April 10, 2009, 07:29:09 PM »
just remember to go slow and take just a litle at a time and then check it. easy to take it off, a little harder to put some back!
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
1979 Sanger Superjet
BBC, 12JG

2savage4you

  • Karma: +14/-1
Re: place diverter and handle used
« Reply #38 on: April 10, 2009, 07:38:01 PM »
I spent an hour yesturday adjusting the cable,heim (sp) joints and found the cable inside the handle slipped out of the clamp.  I guess when they installed the new cable they left out the bottom of the clamp and used washers cause now the screws were too long  :banghead:

All fixed and adjusted with alot more nozzle adjustment up and down....

I would try the adjustments before grinding ???
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Nordie

  • Karma: +13/-0
Re: place diverter and handle used
« Reply #39 on: April 10, 2009, 07:41:48 PM »
hmmm my place diverter has the same issue but my lazy ass needs to order a 43c cable clamp....double check that...my issue seems to be right at the handle too
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party


If im not posting..I'm pooping!

2savage4you

  • Karma: +14/-1
Re: place diverter and handle used
« Reply #40 on: April 10, 2009, 07:47:33 PM »
Quote from: 1980Nordic on April 10, 2009, 07:41:48 PM
hmmm my place diverter has the same issue but my lazy ass needs to order a 43c cable clamp....double check that...my issue seems to be right at the handle too

I was going to order a new clamp but for the price of the clamp compared to shipping  :screwy:, i just made  the flat piece i need for the bottom of the clamp for free ;D

All better now ;)
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

bertus

  • Karma: +0/-0
Re: place diverter and handle used
« Reply #41 on: April 17, 2009, 06:47:14 PM »
i took your guys' advise and pulled out the grinder.  got a few more degrees out of it but maxed out on the tiller arm.  thanks......sorry for jacking the thread
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Luckie Stiff

  • Karma: +29/-0
Re: place diverter and handle used
« Reply #42 on: April 17, 2009, 07:14:33 PM »
Quote from: 1980Nordic on April 10, 2009, 07:41:48 PM
hmmm my place diverter has the same issue but my lazy ass needs to order a 43c cable clamp....double check that...my issue seems to be right at the handle too

Rex has the clamp you need, $1.89, page 108 of thier catalog

Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
"Don't you realize that there are already enough people in the world to hate without you putting so much effort into giving me another?"

HDriderTH

  • Karma: +12/-0
Re: place diverter and handle used
« Reply #43 on: April 17, 2009, 07:20:27 PM »
Told him I got one, got it a block down the road at West Marine......
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

'82 Sanger Bubble deck, Blown 454....V-drive

bertus

  • Karma: +0/-0
Re: place diverter and handle used
« Reply #44 on: April 18, 2009, 10:36:37 PM »
west marine carrys it all.. boat bumpers to night lights.  legit.  not :sly: cheap unfortunately.
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

sandeggo

  • Karma: +7/-0
Re: place diverter and handle used
« Reply #45 on: May 12, 2009, 05:20:37 PM »
the clamp is pretty similar to a volkswagen throttle clamp. the volkswagen is just a little smaller. hey when your at the river you gotta mickey mouse things sometimes
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Nordie

  • Karma: +13/-0
Re: place diverter and handle used
« Reply #46 on: May 12, 2009, 06:41:44 PM »
yeah turned out terry had one for me and problem solved! seems like you got your problem solved as well!
Logged
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party


If im not posting..I'm pooping!
Pages: 1 [2]  All
 


Null

SMFPacks CMS 1.0.3 © 2026