091 trans rebuild

« **on:** October 26, 2013, 11:58:01 PM »

Made a last minute trip out to Glamis for the weekend. Car ran great all day (see video). However at the sand drags on my 2nd pass, I shifted into 3rd, and boom goes the dynamite. Anyhow I'm looking into recommendations or prices from shops in SoCal.

Thanks.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #1 on:** October 27, 2013, 12:40:35 AM »

Check with rancho in anaheim. They do great work and reasonable too. The proce will depend on what you broke. Sounds like either a 3rd gear or ring gear. Without more details its hard to say for sure.

The Beav

« **Reply #2 on:** October 27, 2013, 02:44:00 AM »

I've been using Benco and he is really reasonably priced and a very skilled trans builder. I just so happen to be at Car Craft in riverside and they had one for $1500 with $500 core exchange close ratio gears.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #3 on:** October 27, 2013, 11:06:32 AM »

Quote from: Xthaspot on October 27, 2013, 02:44:00 AM

I've been using Benco and he is really reasonably priced and a very skilled trans builder. I just so happen to be at Car Craft in riverside and they had one for $1500 with $500 core exchange close ratio gears.

Sent from my iPhone using SoCalJetBoats mobile app

did you buy it from Car Craft?

The Beav

« **Reply #4 on:** October 27, 2013, 12:10:58 PM »

I'll be pulling the motor and trans this week to see what it look like. 1st and 2nd pull fine. But when it goes into 3rd. It sounds like the clunking of a train going down the tracks. 4th seems fine as well.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #5 on:** October 27, 2013, 12:58:55 PM »

There's a guy here in Yucca that's good with vw tranys. I could get a number if you want.

RoB~SoCalJetBoats~

« **Reply #6 on:** October 28, 2013, 12:26:12 PM »

Quote from: HardLuck Baker on October 27, 2013, 12:58:55 PM

There's a guy here in Yucca that's good with vw tranys. I could get a number if you want.

RoB~SoCalJetBoats~

Can you pm the number. Or just text it to 760-485-7021.

Thanks.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #7 on:** October 28, 2013, 08:16:02 PM »

Quote from: 77Eliminator on October 28, 2013, 12:26:12 PM

Can you pm the number. Or just text it to 760-485-7021.

Thanks.

Sent from my iPhone using SoCalJetBoats mobile app

. I'm trying to get that number. Should have it tomorrow. The guys good, he built the trans in a buddy's class 5.

RoB~SoCalJetBoats~

« **Reply #8 on:** October 28, 2013, 08:33:25 PM »

Beav no I did not buy it I run a standard type 2 but really good priced.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #9 on:** October 30, 2013, 01:41:02 PM »

transaxel engineering is the only people i have and will ever use

« **Reply #10 on:** December 10, 2013, 07:10:06 PM »

Quote from: Xthaspot on October 27, 2013, 02:44:00 AM

I've been using Benco and he is really reasonably priced and a very skilled trans builder. I just so happen to be at Car Craft in riverside and they had one for $1500 with $500 core exchange close ratio gears.

Sent from my iPhone using SoCalJetBoats mobile app

Agreed!! I know Ben personally and he does amazing work and is very reasonable... Only place I'll take my tranny

Sent from my iPhone using SoCalJetBoats

77Eliminator

091 trans rebuild

Beaveretriever

Re: 091 trans rebuild

Xthaspot

Re: 091 trans rebuild

Beaveretriever

Re: 091 trans rebuild

77Eliminator

Re: 091 trans rebuild

HardLuck Baker

Re: 091 trans rebuild

77Eliminator

Re: 091 trans rebuild

HardLuck Baker

Re: 091 trans rebuild

Xthaspot

Re: 091 trans rebuild

AQUAHOLIC

Re: 091 trans rebuild

Blown R/T

Re: 091 trans rebuild