Elsinore Sunday

« **Reply #50 on:** August 16, 2013, 03:43:32 PM »

Quote from: carrera202 on August 16, 2013, 02:55:25 PM

Bunger the boat looks bitchen man I just checked out the post

Sent from my iPhone using SoCalJetBoats mobile app

Thanks bud! Shes been a pain in my
Ass lately tho. Been runnin around for 3 hours tryin to find the jets i need to hopfully not run as lean as it did monday

« **Reply #51 on:** August 16, 2013, 07:06:16 PM »

Just noticed my Holley carb is leaking at the throttle base plate.. Hopefully I can find a carb shop tomorrow that's open to install some new bushings in it so I can get to the damn lake !!! Any ideas anybody??? Also need to find a damn steering wheel adaptor for a 9 hole steering wheel... My old adaptor doesn't work on my new rack kit!!! Go figure!!! Am I ever gonna get on the damn water!!, any places open in OC or IE tomorrow!!?? FML..

« **Reply #52 on:** August 16, 2013, 07:56:06 PM »

Idk if there open on saturdays but give mckenzies performance a call they may have a sterring adapter

« **Reply #53 on:** August 16, 2013, 07:59:18 PM »

Quote from: mobmentality on August 16, 2013, 07:06:16 PM

Just noticed my Holley carb is leaking at the throttle base plate.. Hopefully I can find a carb shop tomorrow that's open to install some new bushings in it so I can get to the damn lake !!! Any ideas anybody??? Also need to find a damn steering wheel adaptor for a 9 hole steering wheel... My old adaptor doesn't work on my new rack kit!!! Go figure!!! Am I ever gonna get on the damn water!!, any places open in OC or IE tomorrow!!?? FML..

if your near j&m speed center in riverside ca they are open and have holley

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #54 on:** August 16, 2013, 08:00:44 PM »

Quote from: Bunger on August 16, 2013, 03:43:32 PM

Thanks bud! Shes been a pain in my
Ass lately tho. Been runnin around for 3 hours tryin to find the jets i need to hopfully not run as lean as it did monday

did you find the jets man like I told mob j&m speed center has a lot of the stuff

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #55 on:** August 16, 2013, 08:01:58 PM »

Quote from: mobmentality on August 16, 2013, 07:06:16 PM

Just noticed my Holley carb is leaking at the throttle base plate.. Hopefully I can find a carb shop tomorrow that's open to install some new bushings in it so I can get to the damn lake !!! Any ideas anybody??? Also need to find a damn steering wheel adaptor for a 9 hole steering wheel... My old adaptor doesn't work on my new rack kit!!! Go figure!!! Am I ever gonna get on the damn water!!, any places open in OC or IE tomorrow!!?? FML..

oh ya and I don't know if Dana performance off the 91 just west of the 15 might be open but not sure

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #56 on:** August 16, 2013, 08:42:37 PM »

Ya I found a little speed shop by my house. Went from a 59 to a 70 hahah hopefully it's not running lean after that change

« **Reply #57 on:** August 16, 2013, 08:44:03 PM »

Lol hey you got them atleast you gonna be at Elsinore on Sunday bunger

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #58 on:** August 16, 2013, 09:15:15 PM »

Quote from: carrera202 on August 16, 2013, 08:01:58 PM

oh ya and I don't know if Dana performance off the 91 just west of the 15 might be open but not sure

Sent from my iPhone using SoCalJetBoats mobile app

Dana is closed Saturdays .. Open only for appt....wtf is the crap!!!! I'll have to call j/m in the morning... I'm not far from riverside... My main thing is a damn steering adaptor .. I can deal with a Small fuel leak around the carb worst case have to be easy on the motor anyway .. Just need to put some easy time on it... Not gonna put my hatch on until I fix the leak so won't have to worry about fumes building up..... I'll just have to watch it ... Just call me crazy haha... Hopefully someone has an adaptor !!!!

« **Reply #59 on:** August 16, 2013, 09:22:47 PM »

Quote from: mobmentality on August 16, 2013, 09:15:15 PM

Dana is closed Saturdays .. Open only for appt....wtf is the crap!!!! I'll have to call j/m in the morning... I'm not far from riverside... My main thing is a damn steering adaptor .. I can deal with a Small fuel leak around the carb worst case have to be easy on the motor anyway .. Just need to put some easy time on it... Not gonna put my hatch on until I fix the leak so won't have to worry about fumes building up..... I'll just have to watch it ... Just call me crazy haha... Hopefully someone has an adaptor !!!!

not familiar with the adaptor you need what does it look like I have something here at the house but I don't know if it's just a collar or what

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #60 on:** August 16, 2013, 09:56:56 PM »

Zip tie that wheel on and runn it! Hahaha jusy go straight across the lake to the cove ill have a beer waitin for ya!

« **Reply #61 on:** August 17, 2013, 07:34:10 AM »

Quote from: mobmentality on August 16, 2013, 09:15:15 PM

Dana is closed Saturdays .. Open only for appt....wtf is the crap!!!! I'll have to call j/m in the morning... I'm not far from riverside... My main thing is a damn steering adaptor .. I can deal with a Small fuel leak around the carb worst case have to be easy on the motor anyway .. Just need to put some easy time on it... Not gonna put my hatch on until I fix the leak so won't have to worry about fumes building up..... I'll just have to watch it ... Just call me crazy haha... Hopefully someone has an adaptor !!!!

im an idiot I don't have one in the garage I just have the spacer that was behind my adaptor

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #62 on:** August 17, 2013, 07:35:22 AM »

Does anybody know of a good place that I can jet the seals on my hydro diverter ram replaced

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #63 on:** August 17, 2013, 09:25:27 AM »

@bunger& mob hope you guys are on the water tomorrow ill buy ya both a coors light!

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #64 on:** August 17, 2013, 09:44:35 AM »

I'm trying to head out to Elsinore tomorrow too. Just ran into a road block with my oil pan hitting my intake. Now I'm trying to find a new oil pan today so I can still make it out tomorrow. If I find one it might be a late night finishing everything up.

« **Reply #65 on:** August 17, 2013, 10:43:43 AM »

Quote from: carrera202 on August 17, 2013, 09:25:27 AM

@bunger& mob hope you guys are on the water tomorrow ill buy ya both a coors light!

Sounds good to me!

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #66 on:** August 17, 2013, 10:44:50 AM »

Quote from: carrera202 on August 17, 2013, 07:35:22 AM

Does anybody know of a good place that I can jet the seals on my hydro diverter ram replaced

Sent from my iPhone using SoCalJetBoats mobile app

Either go to place diverter in brea or wherever or just do it your self? Probably be able to get and orings or seals youd beed at mcfaddendale

« **Reply #67 on:** August 17, 2013, 10:48:02 AM »

Quote from: NastyNate on August 17, 2013, 09:44:35 AM

I'm trying to head out to Elsinore tomorrow too. Just ran into a road block with my oil pan hitting my intake. Now I'm trying to find a new oil pan today so I can still make it out tomorrow. If I find one it might be a late night finishing everything up.

i got a cold one for ya too nate

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #68 on:** August 17, 2013, 11:25:51 AM »

Quote from: carrera202 on August 17, 2013, 10:48:02 AM

i got a cold one for ya too nate

Sent from my iPhone using SoCalJetBoats mobile app

Well if I make it out I will take you up on the offer.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #69 on:** August 17, 2013, 11:45:39 AM »

Quote from: carrera202 on August 17, 2013, 07:35:22 AM

Does anybody know of a good place that I can jet the seals on my hydro diverter ram replaced

Sent from my iPhone using SoCalJetBoats mobile app

Either go to place diverter in brea or wherever or just do it your self? Probably be able to get and orings or seals youd beed at mcfaddendale

« **Reply #70 on:** August 17, 2013, 12:22:08 PM »

Hell yea just registered and locked down insurance i am go for launch for tommorow!

« **Reply #71 on:** August 17, 2013, 12:31:39 PM »

Quote from: Bunger on August 17, 2013, 10:44:50 AM

Either go to place diverter in brea or wherever or just do it your self? Probably be able to get and orings or seals youd beed at mcfaddendale

If you go,to pace diverter he is going to tell you the same thing he told me about my ram when it was leaking.... He doesn't have rebuild kits... They are not worth rebuilding .. He sells a whole new ram for about $60 is what he quoted me ... Take cash! Real cool guy there..

« **Reply #72 on:** August 17, 2013, 12:35:01 PM »

Sweet guys both of you for the info ill have to pick your brains tomorrow I have more ?s and few beers on me as a appreciation to your help

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #73 on:** August 17, 2013, 12:37:01 PM »

There she is boys now it's wax on wax off time and elbow grease on interior and now you know what boat I got she ain't no hot rod but she floats

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #74 on:** August 17, 2013, 12:40:51 PM »

Quote from: carrera202 on August 17, 2013, 12:37:01 PM

There she is boys now it's wax on wax off time and elbow grease on interior and now you know what boat I got she ain't no hot rod but she floats

Sent from my iPhone using SoCalJetBoats mobile app

Damn looking clean.... Def need to wax mine now today !!! Thanks !!! Hahah