Chroming info?

« **on:** October 31, 2010, 10:08:51 AM »

Any one know of any places around bullhead city, kingman, lake havasu that does chroming or polishing?

« **Reply #1 on:** November 01, 2010, 06:44:46 AM »

I don't know anyone near Havasu but I thought I would post one I do know. These guys have done a lot of old motorcycle parts for a friend of mine and they always come out great.

Good luck

MJB Chrome Plating
236 S Riverside Ave
Rialto, CA 92376-6416
Phone: (909) 875-1910

« **Reply #2 on:** November 01, 2010, 07:40:41 AM »

Thanks crewchief, I'll give them a call.

« **Reply #3 on:** November 01, 2010, 09:09:55 AM »

I was also in need of some too, Would it be better/cheaper to have my bassett headers re chromed insted of buying new ones?

« **Reply #4 on:** November 01, 2010, 10:33:13 AM »

I want my valve covers chromed. They are the old Mickey Thompson ones. Are those able to be chromed?

« **Reply #5 on:** November 01, 2010, 12:16:42 PM »

Quote from: Horizonjet on November 01, 2010, 09:09:55 AM

I was also in need of some too, Would it be better/cheaper to have my bassett headers re chromed insted of buying new ones?

I would have them ceramic coated instead of rechromed. Cheaper and lasts longer.

« **Reply #6 on:** November 01, 2010, 12:17:18 PM »

Quote from: Nixonnow on November 01, 2010, 10:33:13 AM

I want my valve covers chromed. They are the old Mickey Thompson ones. Are those able to be chromed?

Yes.

« **Reply #7 on:** November 01, 2010, 12:57:55 PM »

For what its worth, most of the good plating shops are gone due to EPA laws, I know of several in the OC /LA area that are ISO 9001/9002 spec shops, but they aint cheap.

Daniel
Mash on it

« **Reply #8 on:** November 01, 2010, 01:08:37 PM »

How much coin do you think it would be for two valve covers?

« **Reply #9 on:** November 01, 2010, 01:29:01 PM »

Quote from: Horizonjet on November 01, 2010, 09:09:55 AM

I was also in need of some too, Would it be better/cheaper to have my bassett headers re chromed insted of buying new ones?

I paid $420 to do my bassett twisties. New headers are $950 plus. Its cheaper to buy new valve covers too.

« **Reply #10 on:** November 01, 2010, 01:51:06 PM »

I kinda want to keep the old skool M/T's.

« **Reply #11 on:** November 01, 2010, 03:12:44 PM »

Quote from: crewchief22 on November 01, 2010, 12:16:42 PM

I would have them ceramic coated instead of rechromed. Cheaper and lasts longer.

Jet hot....Do not re chrome your headers. Not even close to worth it IMHO....Unless you just want to look at them and not run the engine.

http://www.jet-hot.com/headercoatings.html

As for the V/C's, chrome would be cool, but why not just polish them? just curious.

We did some a while back in black wrinkle paint and polished the sides and ribs, they came out sik....I was into them for $25, sold them for $150 at a swap meet with MOPAR style breathers..

GT

« **Reply #12 on:** November 01, 2010, 03:33:49 PM »

What should I use for polish? I've got mothers. So just mothers and a rag? How do you get inside the fins?

« **Reply #13 on:** November 01, 2010, 04:40:58 PM »

Quote from: Nixonnow on November 01, 2010, 03:33:49 PM

What should I use for polish? I've got mothers. So just mothers and a rag? How do you get inside the fins?

Same way they would polish them when chromed...

I have a polisher at my house that uses cotton wheels, to get into the grooves you have to use a "loose" wheel, otherwise the Power Ball from Mothers is kick ass...Also have heard nothing but good things about Metal Wax, but have never tried it...

The in between the fins thing is why I used black wrinkle paint.

GT

« **Reply #14 on:** November 01, 2010, 05:03:46 PM »

Ok I'll try that. I'll get that power ball and polish em up. I just want them to be "chiney", even though my intake mani looks like hell. Do you have a guesstimate on how much it would be to chrome them? Just out of curiosity. Thanks

« **Reply #15 on:** November 01, 2010, 06:00:38 PM »

Juan's Metal Polishing
1050 Lake Havasu Ave N # A1, Lake Havasu City, AZ 86403-1905
(928) 855-6878

Don't know anything about them but might be closer to you.

« **Reply #16 on:** November 01, 2010, 06:11:48 PM »

Definately closer. Havasu is only 45 mins from me. Thanks alot crewchief. Where are you getting this info. Obviously I am not looking where your looking. I'll for sure give them a call tomorrow and ask em a couple questions.

« **Reply #17 on:** November 02, 2010, 10:52:21 AM »

Quote from: Nixonnow on November 01, 2010, 01:08:37 PM

How much coin do you think it would be for two valve covers?

I paid 600 to have mine done and they look awesome

« **Reply #18 on:** November 02, 2010, 11:52:35 AM »

Damn....those look sweet. 600 bucks is a chunk of change though. I think I'll try polishing first.

« **Reply #19 on:** November 02, 2010, 10:06:22 PM »

they were in rough shape when I found them and since they sit up and show so much I decided what the hell Id go for it

« **Reply #20 on:** November 02, 2010, 10:50:47 PM »

Exactly right...it's basically the first thing you see when you look at the motor. So I want them to look tits. I'll give polishing a go because its about 25 bucks to polish and 600 bucks to chrome so thats why ill try the polishing first and if that doesn't turn out to my liking I'll think about getting them chromed. But yours do look really good man. Super jealous

« **Reply #21 on:** November 15, 2010, 09:39:10 AM »

I have a set of the M/T valve covers and had them polished years ago and if you get any blow by or even remotely get them dirty, YOU WILL HATE LIFE!
They are getting chromed, one day.
Not to mention they are cast aluminum which I don't think polishes out the best.
Chrome you can hit with Window cleaner to clean them and wipe them down with an oily rag when stored.

-beerjet-

« **Reply #22 on:** November 15, 2010, 09:46:02 AM »

My whole boat is polished aluminum and I'll tell you what it's a full time job just keeping that shit clean

« **Reply #23 on:** November 15, 2010, 02:48:07 PM »

This is exactly why when i did the new motor i swore to myself that i would never have a fully polished deal again...i remember spending hours polishing a motor and after 5 minutes of launching....well you know...everything was water spotted....i would go for the middle....i would powdercoat everything...its affordable...and if you ever get close to boosts boat his looks chrome...but at the end of the day he only needs some soapy water

« **Reply #24 on:** November 15, 2010, 03:24:18 PM »

there is a guy named Juan in Havasu who has done all my stuff good work and fair prices

Nixonnow

crewchief22

Nixonnow

Horizonjet

Nixonnow

crewchief22

crewchief22

mash on it

Nixonnow

YumaJet

Nixonnow

GT Jets

Nixonnow

GT Jets

Nixonnow

crewchief22

Nixonnow

farmergord

Nixonnow

farmergord

Nixonnow

beerjet

HDriderTH

Nordie

82daytona