76 hawaiian project

« **on:** February 16, 2012, 03:50:44 PM »

first I beveled the holes on both sides then i took a 3" hole saw drilled 2 1/2" plugs and glassed them in then I used a da sander smoothed them out then filled with fiberglass bondo you can get it at home depot sanded primered done

« **Reply #1 on:** February 16, 2012, 04:54:55 PM »

awesome thanks

« **Reply #2 on:** February 16, 2012, 08:30:35 PM »

Nicely done! I love working with resin.

Sent from my ADR6400L using Tapatalk

« **Reply #3 on:** February 16, 2012, 11:27:00 PM »

Working with it is cool sanding it sucks

« **Reply #4 on:** February 16, 2012, 11:32:44 PM »

do yerself a favor and mask off the area that doesnt need to be covered with some tape and waxpaper. that way u dont have to sand the drips of resin off.

« **Reply #5 on:** February 17, 2012, 12:14:32 AM »

Cool that is a good idea I did it the hard but the only way to learn is do it next time I will thanks

« **Reply #6 on:** February 17, 2012, 06:33:46 AM »

Also you can make a little tray out of the tape and paper when you're working on the vertical sides to catch the drips

« **Reply #7 on:** February 17, 2012, 08:17:24 AM »

cool another good idea I should of ask for some advice before I did it would of saved me alot of work

« **Reply #8 on:** February 17, 2012, 08:27:54 AM »

oh I got the paint in the other day so when the it a little warmer i will start painting corvette white and Im taking my block to the machine shop next week I will post pics as I go

« **Reply #9 on:** February 17, 2012, 11:04:46 AM »

Quote from: berkbryan on February 17, 2012, 08:27:54 AM

oh I got the paint in the other day so when the it a little warmer i will start painting corvette white and Im taking my block to the machine shop next week I will post pics as I go

sweet. get good at painting and then do mine.

« **Reply #10 on:** February 17, 2012, 11:37:52 AM »

cool i will

« **Reply #11 on:** February 18, 2012, 10:26:09 PM »

here are some more pics learning alot hopefully when done it dont sink

« **Reply #12 on:** February 21, 2012, 09:07:01 AM »

block crank and pistons at the machine shop hopefully i have this thing done this season

« **Reply #13 on:** February 21, 2012, 10:31:28 AM »

Ain't it fun working on your boat?

Sent from my ADR6400L using Tapatalk

« **Reply #14 on:** February 21, 2012, 12:35:14 PM »

Quote from: BIG JOHNSON on February 21, 2012, 10:31:28 AM

Ain't it fun working on your boat?

Sent from my ADR6400L using Tapatalk

No

Fat fingered from the phone- Corey

« **Reply #15 on:** February 21, 2012, 12:52:20 PM »

Quote from: SoCalPSD on February 21, 2012, 12:35:14 PM

No

Fat fingered from the phone- Corey

work on mine then. i promise funtime.

« **Reply #16 on:** February 21, 2012, 01:04:50 PM »

Ohhhhh youuuu promise fun time I say bring it. Lol only problem is you about a 2 hour drive from me.

Fat fingered from the phone- Corey

« **Reply #17 on:** February 21, 2012, 02:41:01 PM »

some parts are fun and some just feels like work but over all im having fun

« **Reply #18 on:** February 24, 2012, 06:53:12 AM »

painted the hull I will get pics up soon

« **Reply #19 on:** March 03, 2012, 08:39:35 AM »

fresh paint

« **Reply #20 on:** March 03, 2012, 09:55:19 AM »

good progress!

« **Reply #21 on:** March 04, 2012, 09:01:37 AM »

Looks great man!

what machine shop did you take your block to?

« **Reply #22 on:** March 04, 2012, 09:24:29 AM »

I use arringdales on I street I dont know if I spelt that right they do good work and they good prices and fast

« **Reply #23 on:** March 04, 2012, 09:41:13 AM »

going to be working on the boat all day today

« **Reply #24 on:** March 04, 2012, 04:32:46 PM »

Perfect day for it!

I'm doing the same thing

berkbryan

82daytona

BIG JOHNSON

berkbryan

ka0tyk

berkbryan

sandeggo

berkbryan

berkbryan

ka0tyk

berkbryan

berkbryan

berkbryan

BIG JOHNSON

SoCalPSD

ka0tyk

SoCalPSD

berkbryan

berkbryan

berkbryan

ka0tyk

74hondo

berkbryan

berkbryan

74hondo