it was a good weekend. i figured out the hull vibration issue. the motor was not set in the boat correctly. it was about half an inch too far forward. so the rear of the motor did not seat up correctly to the jet drive. we did a temp fix. but now i need one of those front motor mount plates. where is the best place to get one.??

thanks for all your help guys

i did not get any phone calls so i guess none of you guys were in the area. i am going back next weekend. i got friday off so i will be out there sunday night.

if any of you are going to be at the lower river give me a call.

http://www.glenwoodmarine.net/Catalog.htm

CP Performance and jetboatperformance are also real good Tom at jetboat performance is a cool cat

Tom 805 975 5155  Give him a call.

I actually have what you need. I am gonna see if it will bolt up to my small block and if it doesnt I will let ya know.
 Jason

hey alkie, call if they dont work out i got some to sell also and i am local to you.  san dimas
dirk 714.420.8648 office number be home after 5.00pm

glen wood marine. i got the bbc mount witht the rubber groments. they charged me 250 and it should be here tomorrow. i am going to be in blythe from thurs to monday. so if any of you are going to be out there let me know..

its just about a mile past the first sand bar  you will c it 

No; not going this weekend. We don't go often because we don't have a boat (have everything else; just no boat). The Blythe area is where I like to go with the family (did the Parker thing a lot in the 80's when had no kids). Maybe one day I'll be able to get that jet boat I've been wanting for years; then we'll go regularly. I'm always looking to stumble into a deal which is what got me to his website; I always look at Craig's list and there was a posting there about SoCalJetBoats.com.

Have a good weekend! Keep the intake on the downside ;-)

Tom, I closed that AIM window without writing down your phone #; I sent you a PM thru this site with my number; give me a call and we'll set something up.
Thanks

Thanks Tom for the contact and offer. If I had enough posts, I'd leave you some good karma.
As we talked about, with the wife and 3 kids, I need more room (I'll probably get flack for this, but we need an open bow).
Again, THANKS!

I'm pretty handy with a saw . I'll make it an open bow .

-beerjet-

That boat is one of the biggest pieces of sh!t I have ever seen in my life , take that thing out of it's misery and make a trip to the dump! Rod and I drove up from San Diego to check it out and what a waste of time! He told me it was a complete boat and just needed the engine put back together over the phone and when I got there that's not what I found! Somebody fiber glassed all over the place and had no clue what they were doing! They did not even use matting , just resin. No floor, no gauges , no steering , one motor mount , the nozzle was off the pump ( which was beat in the first place) not a trace of interior and when I leaned on it my arm turned blue from the oxidation. The trailer had been hit by a car or truck and was badly bent , and on top of it all he failed to mention that there was no plate on the trailer so we could not have towed it if we wanted to ( which there was no chance in hell we would ). I can't believe that some one would let some one else drive all that way under false hopes! So to tom949 ,This pic's for you!!!!

Maybe I'll keep it and "create" something with it!  lol

A bonfire?