So i went to lake nacimiento for the memorial weekend and found that my float was taking on an unusual amount of water!!! well i had some time today to figure it out. The berkeley jet cover leaks!!!, alot!!! so since i had to pull it i thought it would also be a good time to go to headers and cover the exhaust holes in the transom. heres  the start!

Well i finished removing the holes! i just put it in paint for now. this winter im going to regell the whole boat, i now just have to fix one more spot.

Thank you!!!

Sent from my VK810 4G using SoCal Jet Boats mobile app

Looks good did you use the high temp BBQ paint


Sent from my iPhone using SoCalJetBoats mobile app

i finally had sometime to finish up this mess as it were. got the cover back on , and painted . I just now need to replace the forward/reverse cable and im good to go!

yes you will need to scratch up the chrome first tho!!!   use scotch brite or steelwool  to do the job. if not i will flake off.are they that bad??? cant tell from the pic.

Before giving up on the chrome id try some chrome polish 00 steelwool for the rust. I dont like chrome for that reason, its just not as good as it use to be!!! i cant remember the name of the stuff but it came in a toothpaste tube for the chrome polish .

im running mine dry!!!  going to send them out to be coated this winter .

yes they sand blast and then coat them and then there not suppose to rust!  but we ll see !!! lol

Ha !!!! your not lieing about that!!!!   i do believe that a couple of the companies give a warranty tho! 

agreed !!! im going to go with Embee or jet coat.