New Project...

« **Reply #125 on:** June 05, 2010, 05:40:54 PM »

Frickin chebbie guys, dont ya think the fuses were the first thing to check

The blinker lights, the high beam lights, the tach, none of it working. After a couple of days and taking the lcd display apart, putting it all back together, it ALL worky now

I am just un mickey mousing what the previous owner did

Are all you chebbie guys like this

« **Reply #126 on:** June 05, 2010, 05:45:43 PM »

Quote from: 76NORDIC on June 05, 2010, 05:40:54 PM

Frickin chebbie guys, dont ya think the fuses were the first thing to check The blinker lights, the high beam lights, the tach, none of it working. After a couple of days and taking the lcd display apart, putting it all back together, it ALL worky now I am just un mickey mousing what the previous owner did Are all you chebbie guys like this

Hey baby...it all worked when you got the car...For decades :sly:Ferd boy

r u saying GM m/moused the car.... :sly:This thing was tight dude when your wife drove it home

« **Reply #127 on:** June 05, 2010, 06:08:12 PM »

did you let the tweakers work on it?

« **Reply #128 on:** June 05, 2010, 06:40:20 PM »

Quote from: Ralph Brunt on June 05, 2010, 06:08:12 PM

did you let the tweakers work on it?

No just Mark...the Ferd guy......the prob. is there

Tooo many Cervesas

Ralph you gone Chevy too

« **Reply #129 on:** June 05, 2010, 06:51:14 PM »

Quote from: enginedoctor on June 05, 2010, 06:40:20 PM

No just Mark...the Ferd guy......the prob. is there Tooo many Cervesas
Ralph you gone Chevy too

shhhhhhhhhhh dont tell anybody

« **Reply #130 on:** June 05, 2010, 06:56:12 PM »

Quote from: enginedoctor on June 05, 2010, 05:45:43 PM

Hey baby...it all worked when you got the car...For decades :sly:Ferd boy
r u saying GM m/moused the car.... :sly:This thing was tight dude when your wife drove it home

May have worked DECADES ago, and you say tight

Who the hell you think told me what was needing fixing

Quote from: Ralph Brunt on June 05, 2010, 06:08:12 PM

did you let the tweakers work on it?

Nah Ralph just me and my beers,

How is your Dad doing, I hope well

Did ya give him the bad news about you going to the dark side

« **Reply #131 on:** June 05, 2010, 07:02:27 PM »

Quote from: 76NORDIC on June 05, 2010, 06:56:12 PM

May have worked DECADES ago, and you say tight Who the hell you think told me what was needing fixing Nah Ralph just me and my beers, How is your Dad doing, I hope well Did ya give him the bad news about you going to the dark side

Ya Ralph...How's Pop's.... Glad to see you got a chevy.......Keep working on the vette Mark..you'll get it.
after all you posted Mark..I decided to fix my boat myself

« **Reply #132 on:** June 05, 2010, 07:14:20 PM »

ya i told him and he said, you stupider than i thought.

« **Reply #133 on:** June 05, 2010, 07:18:37 PM »

Quote from: Ralph Brunt on June 05, 2010, 07:14:20 PM

ya i told him and he said, you stupider than i thought.

I about fell outta my chair laughing at that

So that means he is feeling just great

« **Reply #134 on:** June 05, 2010, 07:24:17 PM »

Quote from: enginedoctor on June 05, 2010, 07:02:27 PM

Ya Ralph...How's Pop's.... Glad to see you got a chevy.......Keep working on the vette Mark..you'll get it.
after all you posted Mark..I decided to fix my boat myself

Whats that supposed to mean shorty

I keep asking you and ya keep telling me we will get round to it, which reminds me I got a roundtoit to sell you

I know you have been busy, but ya gotta make time, just let me know shorty

« **Reply #135 on:** June 05, 2010, 07:29:38 PM »

Quote from: Ralph Brunt on June 05, 2010, 07:14:20 PM

ya i told him and he said, you stupider than i thought.

THATS WHY i LOVE YOUR POP'S.....TO THE POINT.

« **Reply #136 on:** June 05, 2010, 07:31:38 PM »

Quote from: Ralph Brunt on June 05, 2010, 07:14:20 PM

ya i told him and he said, you stupider than i thought.

I spewed beer all over the laptop.........

Guess it's still werkin......Funny shit Ralph!

Glad pops is feeling better!

Ray

« **Reply #137 on:** June 05, 2010, 08:52:44 PM »

Quote from: 76NORDIC on June 05, 2010, 07:24:17 PM

Whats that supposed to mean shorty I keep asking you and ya keep telling me we will get round to it, which reminds me I got a roundtoit to sell you I know you have been busy, but ya gotta make time, just let me know shorty

Just messing w/u mark.....found out a few things about the boat...I'll callya

"she's ready"

« **Reply #138 on:** June 29, 2010, 06:10:42 PM »

A few things done, I did get the blinker indicators, and high beam indicator to work after pulling the dash apart. Took the steering column apart also to get the blinker to turn off when you turned the wheel the other way. Got me a cheapy harbor freight plastic welder and welded the door panel that was about half cracked, now the rear bumper will be my next target with the welder. That shit works good! Replaced the broken door handle, and put in a new door lock. Fixed the pad on top of the door panel ( 2 of the plastic studs were broke} Replaced both the lower window wipes, Put in a foam sound barrier between the door and panel, ( the one that was there was missing) Re-glued the carpet and some plastic parts on the door panel, and then painted. Whew

« **Reply #139 on:** July 01, 2010, 07:57:08 PM »

nice work!...get that spoiler done too

I guess not to many Corvette fans here

« **Reply #140 on:** July 01, 2010, 08:08:46 PM »

Quote from: enginedoctor on July 01, 2010, 07:57:08 PM

nice work!...get that spoiler done too
I guess not to many Corvette fans here

I am holding out for a Challenger SRT10

http://www.autoblog.com/2008/10/14/sema-preview-dodge-bringing-viper-powered-challenger-srt10-conc/

Corvettes are cool, just like em as old as me...

1967 BTW

GT

« **Reply #141 on:** July 01, 2010, 08:25:05 PM »

Guess i will have to change your mind GT!.....I'll give you a ride in my 66'....it's older

« **Reply #142 on:** July 05, 2010, 03:56:52 PM »

Well one down, one to go. Did some plastic welding and filling, cause it was sunk in also. Just need to do a little more sanding and a shot or 2 of primer

« **Reply #143 on:** July 05, 2010, 07:07:55 PM »

Looks good Mark

...enjoy bolting the spoiler on

« **Reply #144 on:** July 05, 2010, 07:11:00 PM »

ya that I am not looking forward to

« **Reply #145 on:** July 05, 2010, 08:18:33 PM »

Quote from: enginedoctor on July 01, 2010, 08:25:05 PM

Guess i will have to change your mind GT!.....I'll give you a ride in my 66'....it's older

Older is OK by me

........We built a totaled out 1980 L82 with a Daytona nose and tail, it was a lot like trying to put the skin back on a rattlesnake...

Nice work 76.

What are you using to "weld" the plastics with if you don't mind my asking? Just curious.

GT

« **Reply #146 on:** July 05, 2010, 08:25:44 PM »

He is using a plastic welder, which I never heard of..new for me,I learned something

« **Reply #147 on:** July 07, 2010, 05:31:30 PM »

They had a variety of them at good ole harbor freight, which I opted for the high dollar (12 bucks) LOL one. Not bad of a deal really came with what is basicallly a soldering iron, with a 3/4 x 3/4 soldering head, a wire brush to clean the head, a little chickenshit stand for the iron, and about 25 plastic welding strips, and also some wire mesh, which my dumbass wasn't to sure how to use. Said in all the directions was perfect for use on the plastic/rubber parts of autos. I tested on the door panel which was cracked almost in half, and it turned out tits, stronger than shinola

So next was the back part, and after prepping it, welding it, then sanding smooth, I was done. Even took a 3/4 extension bar and pushed pretty dammnn hard on it to see if I could break it, and it didn't

and a few of these since I didn't fruck it up

« **Reply #148 on:** July 07, 2010, 10:14:47 PM »

Quote from: 76NORDIC on July 07, 2010, 05:31:30 PM

They had a variety of them at good ole harbor freight, which I opted for the high dollar (12 bucks) LOL one. Not bad of a deal really came with what is basicallly a soldering iron, with a 3/4 x 3/4 soldering head, a wire brush to clean the head, a little chickenshit stand for the iron, and about 25 plastic welding strips, and also some wire mesh, which my dumbass wasn't to sure how to use. Said in all the directions was perfect for use on the plastic/rubber parts of autos. I tested on the door panel which was cracked almost in half, and it turned out tits, stronger than shinola So next was the back part, and after prepping it, welding it, then sanding smooth, I was done. Even took a 3/4 extension bar and pushed pretty dammnn hard on it to see if I could break it, and it didn't and a few of these since I didn't fruck it up

Thanks...I guess I have something to add to the tool list

GT

« **Reply #149 on:** July 07, 2010, 10:50:10 PM »

Really was easy Glen, and was surprised myself how well it came out

76NORDIC

enginedoctor

Ralph Brunt

enginedoctor

Ralph Brunt

76NORDIC

enginedoctor

Ralph Brunt

76NORDIC

76NORDIC

enginedoctor

IRRebel

enginedoctor

76NORDIC

enginedoctor

GT Jets

enginedoctor

76NORDIC

enginedoctor

76NORDIC

GT Jets

enginedoctor

76NORDIC

GT Jets

76NORDIC