paging mr jim brock

« **on:** June 29, 2009, 12:16:22 PM »

i here you are the one to talk to about tunnel dragsters=im am looking for the inspection cover on the back of the pods=do the oem ones have writing on them or a design or just plain aluminium plate=i would like to find an original one if you have one or know who does==thanks doug

« **Reply #1 on:** June 29, 2009, 08:32:24 PM »

Just curious does yours have an opening or is the glass solid ? Tom

« **Reply #2 on:** June 29, 2009, 08:48:52 PM »

it looks like from underneath that it was glassed over and used to have one

« **Reply #3 on:** June 29, 2009, 09:09:23 PM »

Although I did take some teasing , I like mine !

« **Reply #4 on:** June 30, 2009, 06:42:47 AM »

I like it too Tom! Ingenuity! (Tried to see if one would fit on the pump cover on the Moo, no luck, holes too big)

Ray

« **Reply #5 on:** June 30, 2009, 07:23:54 AM »

that is slick tom=diffently a hot rod look for a hot rod boat= dont know if you read my reply from other post on my dragster build=but thanks again for turnaround on the drive shaft=excellant job

« **Reply #6 on:** June 30, 2009, 07:35:34 AM »

Glad it worked out !! (the Drive line) Tom

« **Reply #7 on:** June 30, 2009, 03:28:50 PM »

what would your recommendation be as too how far back your cav plates should be=mine are set back almost to the end of the pod=when i get on it it jumps out of the hole find and then gets planted in the water=its a great ride and stable in the water=i guess its a preference thing=does this look to far back

« **Reply #8 on:** June 30, 2009, 03:40:35 PM »

they are just a alum. plate, i am going to have mine done, sothwind 19 dragster' you ddon't need one with the shortened pod, your hand hole is outside the boat

« **Reply #9 on:** June 30, 2009, 09:06:22 PM »

i have never seen one up close so was not sure what they looked like or was written on them=i will probably still do one as it will make things alot easier to access =water lines grease fitting etc-thanks for the input=do you have any input in regards to the cav plates=thanks doug

just squirtin

paging mr jim brock

jet boat performance

Re: paging mr jim brock

just squirtin

Re: paging mr jim brock

jet boat performance

Re: paging mr jim brock

IRRebel

Re: paging mr jim brock

just squirtin

Re: paging mr jim brock

jet boat performance

Re: paging mr jim brock

just squirtin

Re: paging mr jim brock

jim brock

Re: paging mr jim brock

just squirtin

Re: paging mr jim brock