just got back a little while ago, man what a good time. leagal chemistry i looked for you out there thought i saw you turned arround and chased this boat about 4 miles down by the dam asked if it was you and well  it wasnt. he had the same paint job on his boat as yours. well i tried had a great trip boat ran perfect though i could only get 56mph @4400 rpm. but i guess i can sacrafice some speed for reliability huh. anyways here are a few pics for you guys to enjoy.

more

Cool pics!

i was gonna ask you guys about the ride plate. it porposes alot even at high speed. as for a grate i need something because any small wake or if i get bouncin to much it unloads the pump.

I can't really tell from your pics, since bringing the nozzle up will make porpoising worse. If you are properly trimmed and have a problem, check the angle on your plate. Although 4* is a common starting point, I run 2* with the E pump on my Advantage. Drop it a degree or so and check check if it's better. Sounds like you're trying to lift the bow without enough HP. Getting your tune optimized may help also.
As far as unloading, I would work with your plate BEFORE adding a loader. If adjusting it helps keep it loaded, then try a ski loader. It's a slow process, but remember to just make one change/adjustment at a time. If it gets worse, you'll know what did it and be able to go back to a previous setup.