What did you do to your boat today?

« **Reply #1875 on:** March 06, 2015, 09:39:18 PM »

Quote from: JARVIS on March 06, 2015, 09:26:16 PM

maybe youve seen this....maybe not...

Yeah I've seen it. Many times. I was there that weekend when they filmed it.

It comes down to this. when you pop the valve open water comes out of the clean out but it still loads the bowl up with pressure. Unless you unload the pressure "aka" drop a few 100 RPMs you will not slow down a whole lot.
I've got time slips in the hauler that show if you have the valve open from the tree to the end of 1320ft = a consistent 1/10th off of our e/t compared to a full track pass with the valve closed. I also use the valve to mess with hydros that come screaming passed me sometime. Hope they slam off the peddle. Lol!

Also in that video you can hear the boat on the 2 step for about 2 to 4 seconds mid run. Slowing it down even more.

That track sucks! It's always a battle for use there because the water is always messed up.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #1876 on:** March 06, 2015, 09:41:24 PM »

awesome, thanks for indulging me.

« **Reply #1877 on:** March 06, 2015, 09:41:58 PM »

Quote from: JARVIS on March 06, 2015, 09:41:24 PM

awesome, thanks for indulging me.

No problem bud. 👍👍👍

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #1878 on:** March 06, 2015, 10:00:45 PM »

Awesome video. 👍

Sent from my iPhone using SoCalJetBoats

« **Reply #1879 on:** March 07, 2015, 01:43:21 PM »

In Blythe, Installing amps, different head unit, and a sub on the boat

Sent from my iPhone using SoCal Jet Boats

« **Reply #1880 on:** March 07, 2015, 01:58:01 PM »

Pulled the motor to put in new gaskets and paint it and slap on a new pan

Sent from my iPad using SoCal Jet Boats

« **Reply #1881 on:** March 07, 2015, 03:19:38 PM »

Got the MSD digital 7 all hooked up 👍👍👍

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #1882 on:** March 07, 2015, 03:52:30 PM »

Installed some ball valves coming off of my gas tanks and ordering some braided lines

Sent from my iPhone using SoCal Jet Boats

« **Reply #1883 on:** March 07, 2015, 03:57:15 PM »

Gave my heads to my engine builder today. He is goin to take them to his speed shop to verify they are good to go.

« **Reply #1884 on:** March 07, 2015, 06:14:08 PM »

Got bored this afternoon, so I started to polish out my stainless headers.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #1885 on:** March 07, 2015, 06:37:03 PM »

Took carbs off gotta rebuild well be ready by next weekend for test run at silver wood 🚤💨🍻 👍

Sent from my iPhone using SoCal Jet Boats

« **Reply #1886 on:** March 07, 2015, 07:50:38 PM »

Started some prep for partial floor replacement

« **Reply #1887 on:** March 07, 2015, 07:54:33 PM »

Removed my pump (was brand new last year) the impeller is all cracked up. I am polishing the aluminum since the motor is out too.

Sent from my iPhone using SoCal Jet Boats

« **Reply #1888 on:** March 07, 2015, 09:02:35 PM »

Quote from: Roadrunner on March 07, 2015, 07:54:33 PM

Removed my pump (was brand new last year) the impeller is all cracked up. I am polishing the aluminum since the motor is out too.

Sent from my iPhone using SoCal Jet Boats

What do the bowl bearings look like.? Twisted shaft?

Sent from my SM-G900V using SoCal Jet Boats mobile app

« **Reply #1889 on:** March 07, 2015, 09:51:24 PM »

Quote from: GT Jets on March 07, 2015, 09:02:35 PM

What do the bowl bearings look like.? Twisted shaft?

Sent from my SM-G900V using SoCal Jet Boats mobile app

I don't know yet GT. Jim is going to check it out tomorrow. This is above my pay grade.

Sent from my iPhone using SoCal Jet Boats

« **Reply #1890 on:** March 08, 2015, 01:52:45 AM »

Got all the old paint off the trailer and had my welder come over. New paint, bearings and hubs in a few days

« **Reply #1891 on:** March 08, 2015, 06:43:12 PM »

Rebuilt the 600's

Sent from my MB860 using SoCal Jet Boats mobile app

« **Reply #1892 on:** March 08, 2015, 07:38:48 PM »

Little intake cleaning.

Sent from my iPhone using SoCal Jet Boats

« **Reply #1893 on:** March 08, 2015, 07:50:08 PM »

Quote from: aquaholic72 on March 08, 2015, 06:43:12 PM

Rebuilt the 600's

Sent from my MB860 using SoCal Jet Boats mobile app

. Looking good😜

Sent from my iPhone using SoCal Jet Boats

« **Reply #1894 on:** March 08, 2015, 08:39:24 PM »

Yesterdays minor victory....

Another day of boat-honey do's - one big step closer to the river!
Rest of gauges installed and tested. Check
Fuel Filters and water separators changed. Check
Primed fuel system. Check
Mounted driver seat and gas pedal in right positions. Check
LED Running lights installed and tested. Check
Installed ski locker wood cover Dad refinished. Check & Kudos Dad!
just about ready, now we just need, mmmmmm lets see.....
oh yeah, THE ENGINE! soon QMP Racing will be done with it!

« **Reply #1895 on:** March 08, 2015, 09:51:58 PM »

Quote from: jimpen on March 08, 2015, 07:50:08 PM

. Looking good😜

Sent from my iPhone using SoCal Jet Boats

thnx jimpen.. same old turd, new look.. lol

Sent from my MB860 using SoCal Jet Boats mobile app

« **Reply #1896 on:** March 08, 2015, 09:55:11 PM »

Quote from: socaljst1970 on March 08, 2015, 08:39:24 PM

Yesterdays minor victory....

Another day of boat-honey do's - one big step closer to the river!
Rest of gauges installed and tested. Check
Fuel Filters and water separators changed. Check
Primed fuel system. Check
Mounted driver seat and gas pedal in right positions. Check
LED Running lights installed and tested. Check
Installed ski locker wood cover Dad refinished. Check & Kudos Dad!
just about ready, now we just need, mmmmmm lets see.....
oh yeah, THE ENGINE! soon QMP Racing will be done with it!

also lookin good.. cant wait to to hang out in the cove with everyone.. hopefully soon..

Sent from my MB860 using SoCal Jet Boats mobile app

« **Reply #1897 on:** March 08, 2015, 10:15:52 PM »

Going for gel coat and set back pump shoe and ride plate new stringers

Sent from my iPhone using SoCal Jet Boats

« **Reply #1898 on:** March 08, 2015, 10:34:26 PM »

Put the motor back in the boat !

« **Reply #1899 on:** March 08, 2015, 11:19:52 PM »

Quote from: Tylertjeep73 on March 08, 2015, 10:34:26 PM

Put the motor back in the boat !

what carbs are on ur t-ram?

Sent from my MB860 using SoCal Jet Boats mobile app

jyeager

JARVIS

jyeager

loweryjennifer

Kroggy3771

19CHALLENGER78

jyeager

74hondo

FordLover

jyeager

chris mcd

H20Nut21Bahner

Roadrunner

GT Jets

Roadrunner

bbhawaiian18

aquaholic72

ghett0man

jimpen

socaljst1970

aquaholic72

aquaholic72

lifted250

Tylertjeep73

aquaholic72