1 degree wedge

« **on:** June 29, 2016, 07:29:10 PM »

Looking for a 1 degree wedge anybody have one not being used.

« **Reply #1 on:** June 29, 2016, 07:42:30 PM »

Jim Brock Brian he is in Santa Ana u need #

Sent from my iPad using SoCalJetBoats mobile app

« **Reply #2 on:** June 29, 2016, 07:46:31 PM »

Ok thanks I'll look into it kinda need it asap for this weekend

« **Reply #3 on:** June 29, 2016, 07:50:39 PM »

He has them .. Where u going this weekend I

Sent from my iPad using SoCalJetBoats mobile app

« **Reply #4 on:** June 29, 2016, 07:53:46 PM »

Friday morning

« **Reply #5 on:** June 29, 2016, 08:00:58 PM »

U going to ah hah I just text him let's see if he has it ...

Sent from my iPad using SoCalJetBoats mobile app

« **Reply #6 on:** June 29, 2016, 08:06:21 PM »

Actually what also would work is a 3/8 spacer

« **Reply #7 on:** June 29, 2016, 08:07:49 PM »

Sam is going to b1 tommorow or get my parts from Chris's I bet he has one and then we're going to hidden beaches u can get it from us .. Let Sam no befor 4pm tommorow

Sent from my iPad using SoCalJetBoats mobile app

« **Reply #8 on:** June 29, 2016, 08:09:50 PM »

I called Joe still waiting for a call back

« **Reply #9 on:** June 29, 2016, 08:10:00 PM »

Quote from: BOOST on June 29, 2016, 07:29:10 PM

Looking for a 1 degree wedge anybody have one not being used.

Take two fours and install them 10-2 o-clock.

« **Reply #10 on:** June 29, 2016, 08:10:00 PM »

Thanks bud

« **Reply #11 on:** June 29, 2016, 08:12:53 PM »

Quote from: GT Jets on June 29, 2016, 08:10:00 PM

Take two fours and install them 10-2 o-clock.

I have one of each on the wedges not two, what I have going on is I bought a ARP stub kit but the shoulder is 3/8 to long on the stud

« **Reply #12 on:** June 29, 2016, 08:15:46 PM »

Center shoulder is 3/8 to long

« **Reply #13 on:** June 29, 2016, 09:03:47 PM »

I mite have one boost, but i think its not double drilled.

« **Reply #14 on:** June 30, 2016, 05:44:59 AM »

Problem solved Nick came through for me 1/2 aluminum spacer thanks bud

« **Reply #15 on:** June 30, 2016, 05:46:54 AM »

Thanks Nick last minute late night

« **Reply #16 on:** June 30, 2016, 05:49:14 AM »

Just curious what your changing on your set up ?

Sent from my iPhone using SoCal Jet Boats

« **Reply #17 on:** June 30, 2016, 05:58:59 AM »

Quote from: 69kona on June 30, 2016, 05:49:14 AM

Just curious what your changing on your set up ?

Sent from my iPhone using SoCal Jet Boats

Still playing with the hardware setup on the pump droop was down below the rideplate 3/4, rideplate is set at 3 degrees now and droop is up 3/4 above the rideplate

« **Reply #18 on:** June 30, 2016, 08:26:17 AM »

Quote from: BOOST on June 30, 2016, 05:58:59 AM

Still playing with the hardware setup on the pump droop was down below the rideplate 3/4, rideplate is set at 3 degrees now and droop is up 3/4 above the rideplate

Shouldn't hurt anything being below the plate. Do it all the time.

GT

« **Reply #19 on:** June 30, 2016, 08:42:02 AM »

I had a 4 degree wedge in it to start with which put me below the rideplate shouldn't hurt being above also I'm thinking less drag in the water plus one less bend in the setup.

« **Reply #20 on:** June 30, 2016, 09:02:34 AM »

Intake, rideplate etc was all setup with the right angles, why I decided to add the 4 degree wedge and leave it I do know, was told I didn't need it, with the straighter trust angle hopefully I'll see some improvements.

« **Reply #21 on:** June 30, 2016, 09:22:22 AM »

Quote from: BOOST on June 30, 2016, 08:42:02 AM

I had a 4 degree wedge in it to start with which put me below the rideplate shouldn't hurt being above also I'm thinking less drag in the water plus one less bend in the setup.

Don't concern yourself too much with the bends. The effect is (IMO) immeasurable.

The concern lies with the actual thrust line (aka X dimension) and how the hull reacts to that height.

GT

« **Reply #22 on:** June 30, 2016, 09:30:48 AM »

Quote from: GT Jets on June 30, 2016, 09:22:22 AM

Don't concern yourself too much with the bends. The effect is (IMO) immeasurable.

The concern lies with the actual thrust line (aka X dimension) and how the hull reacts to that height.

GT

Agreed taking all my hardware so I can make some changes if needed

« **Reply #23 on:** June 30, 2016, 09:32:56 AM »

Just need to play with some nozzle inserts I've have only tryed the red thinking of going up 2 sizes

« **Reply #24 on:** June 30, 2016, 09:30:42 PM »

I think I have a teal on you can try, I'll look tomorrow and see what I got.

Sent from my iPhone using SoCal Jet Boats

BOOST

Trou8l3d

BOOST

Trou8l3d

BOOST

Trou8l3d

BOOST

Trou8l3d

BOOST

GT Jets

BOOST

BOOST

BOOST

jyeager

BOOST

BOOST

69kona

BOOST

GT Jets

BOOST

BOOST

GT Jets

BOOST

BOOST

lupo1904