While I am doing some maintenance I took my carb off to freshen it up . I need some advice and/or opinions.  I removed the choke . I don't think I need it . Mabey I do not really sure . My question is what do I do with the hole that the choke arm went through the carb housing ? Can I leave it open or should I close it some how ?

Sent from my SAMSUNG-SGH-I337 using SoCal Jet Boats mobile app

I took my choke out years ago and just left the hole alone.  No apparent ill effects.  I suppose you could silicone it closed or put a tiny piece of gorilla tape over the hole on the bottom side if it worries you.

Quick question.  I have a vacuum secondary holly as well. Mine is a 780 cfm. Carb just curious if you kept the power valves in your carb ? Mine also has the choke removed I have best left that little hole open as well..

Sent from my SAMSUNG-SM-N920A using SoCal Jet Boats mobile app

You don't need the choke,  if you're worried about the hole, alil bit of jb weld will fill it nicely , I never plug mine tho.  So many boats on here don't even run air filters!  Whatever can make it's way thru that lil hole is miniscule.. 👍👍👍👍 jmo

your friendly local v-drive owner

There's so many rebuild kits . What kit should I go with . The list is 4118 . Says 4150 725 cfm. The fast kit I think should be fine . But not really sure if it comes with evry thing I need . I got the last one from O'Reilly but they don't have the holley brand anymore .

Sent from my SAMSUNG-SGH-I337 using SoCal Jet Boats mobile app