Mine has 8 nitrous holes


Sent from my iPhone using SoCal Jet Boats

Okay, so i could be wrong here. And proabbly am

But i did some research. It sounds like the "Powershot" plate is pre-set to 125 hp. Non adjustable. I guess its already drilled to flow that much and you dont need jets.

PLEASE CALL HOLLEY AND VERIFY THE ABOVE INFORMATION

But if thats true, then you're kind of stuck. I looked at your picture and it does look like an old powershot system.

Further, looking at the manual for a powershot system. It does not list any jetting tables, or even jetting included with the kit.

So im assuming the above is correct.

RonBeaty said:
10-11-2010 02:01 PM
Default
a cheater plate has 8 holes in each spray bar and uses a 16000-1-snos Nitrous solenoid

a big shot plate has 17 holes in each spray bar and uses a 16045-1-snos Nitrous solenoid
This is what I found because I can put jets on my kit but on a powershot u can't ..know I'm confused 😕lol
 
 


Sent from my iPhone using SoCal Jet Boats

Like i said, i could be wrong.

I would recommend calling Holley and seeing exactly what you have. Over the years there may be re-designs etc.

Call them up they will tell you exactly what you have. I know my cheater plate has 16n16f holes. But mine is brand new and a new design.

I called Holley confirmed its a older Cheater plate and was told to use the old jet chart..should I get a newer plate?
Just wondering ?


Sent from my iPhone using SoCal Jet Boats

Thats completely up to you...

The newer one atomizes better. Ive seen where the older ones leak where the tubes go into the plate if that makes sense

but it should be fine for you.

Cool I appreciate your input and help .   , I thinking of getting a newer plate


Sent from my iPhone using SoCal Jet Boats

no problem. Thats one of the reasons when i bought my kit i just went new. So everything was new and no surprises.

you can always send your plate and noids to NX, NS or Induction Solutions. Have it flowed/tested and they will send you the jets/tuneups and make sure everything is 100%

Yeah that might have to happen . I don't want to hurt my motor because of my mistake ...


Sent from my iPhone using SoCal Jet Boats

when i looked into it, it was like 400 to send it in. They flow it and get you i think 4 tuneups (induction solutions)

an entire new system from nos is 633.00 and that includes a bottle

jsut food for thought. I truthfully wanted the Nitrous Outlet Stigner system but it was more money

Do u think I should off the kit I have ...or? I have no money in what kit I have now lol..went through father in laws nitrous stuff !
Got two of these bottles full ..😋


Sent from my iPhone using SoCal Jet Boats

Give one of the nitrous places a call, and see what they charge to go through it. If its only a couple hundred bucks, its worth it

Ohhhh and same tune up, 150 jets and all. From one plate to the new was holly shit a difference. 

That's a good deal but idk I'd it's current generation or not

32 holes in spray bars  from what the ad says ...


Sent from my iPhone using SoCal Jet Boats

yeah looks liek a good deal. I think you should need to up your solenoid size if you want to spray a 150 or higher.

Well I tested it at Avi and she's alittle rich in the tune .. Were should I start to lean it jets or fuel pressure . There wasn't any detonation . It was cool to feel it hit 😀 but I need to tune it better . The plugs were black at the rim and porcelain was tan ... Ideas?


Sent from my iPhone using SoCal Jet Boats

what's your fuel psi flowing?

Ok I'm gonna be out here next week to maybe you can give me a hand tuning this pig. Lol. Much appreciated


Sent from my iPhone using SoCal Jet Boats

Haha