tryin to find out where i get the one way valves to run my breathers into my exhaust or if you have any better ideas im open for suggestions i have a bbc with valve covers that were set up for a puke tank and im not really down to go with a puke tank what do i do?

tryin to find out where i get the one way valves to run my breathers into my exhaust or if you have any better ideas im open for suggestions i have a bbc with valve covers that were set up for a puke tank and im not really down to go with a puke tank what do i do?

If you are talking about what I think you are, you are talking about gulp valves, they are used on numerous different vehicles as an emissions part from the air injection pump on a car/truck... 

You need to have a bung welded into the OT pipes and they screw on to a pipe thread...

GT

small pic but this is the motor and the pic lbhsbc posted has the exhaust parts im lookin for i have straight fittings welded in the valve covers there lupos old covers

small pic but this is the motor and the pic lbhsbc posted has the exhaust parts im lookin for i have straight fittings welded in the valve covers there lupos old covers

That is a fine looking engine.

What is the finish on the block and valve covers?