I found a thread on here about oil changes using a 5 gallon bucket and a shop vac. I gave it a shot and I'm having an issue with the bucket wanting to collapse from the suction of the vac. Anyone have any bright ideas. I may just ditch this and go back to how I was doing it before.

I've only got about 2 qt out so far.
Thanks.

Sent from my XT1058 using SoCal Jet Boats mobile app

10 minute oil change with zero mess....


Sent with my Fingers

When I had the boat with remote oil filters I would just pull the ignition fuse out and crank it with a hose in a bucket, could remove the oil in about 6 seconds of cranking the engine.

Jabsco makes a bucket mounted pump for doing just this task, I have one and it works great, the oil should be warm though, cuts the time in half...


The pump...

http://www.northerntool.com/shop/tools/product_200319197_200319197?cm_mmc=Google-pla-_-Fuel%20Transfer%20%2B%20Lubrication-_-Oil%20Extractors-_-332250&ci_src=17588969&ci_sku=332250&gclid=CLPAn6reyr0CFUFufgod2nAA-A

The oil heater, mine was purchased at Northern, but is 300 watts, they don't have it anymore... Heats all the oil in the pan in just a few hours.

http://www.amazon.com/Kats-1153-Handi-Heat-Magnetic-Heater/dp/B000BOABS6