What do you guys recommend or have used to seal the exhaust tips on the fiberglass side of the boat?  Got some new polished tips but need to seal them better.

thanks

-joe

What do you guys recommend or have used to seal the exhaust tips on the fiberglass side of the boat?  Got some new polished tips but need to seal them better.

thanks

-joe

If they are like these...I used clear marine silicone. No need for high temp. They are always in the water and water is always on its way out....Put a nice bead around the tube to flange area.
Make sure you get some around the bolts and snug it up...wait for a few then tighten up.

+1 on getting them snug and then letting it set up with some clear silicone.  then once its kicked a little bit tighten up the bolts.  otherwise you'll just squeeze all of it out and you'll get a little pin leak. 

at least thats how i was told to do it on another board.