NJBA April race, Got a tuning lesson from Chris and was ready to get after it at this race! We set when the diverter was going to start coming up one tenth of a second faster
a put a rev limiter on it for a couple of thenths. 1st pass off the trailer thing went 9.85 at 102, ok now let's put some more rev limiter in it and try to get to the magic # of 10.0
next round it started to misfire and make some noise on the rope, WTF! drove it to other end and put it on the trailer, start pulling plugs etc. #2 cylinder spark plug looks
all beat up. Exhaust seat cam out of head, should have known better than try and run my old heads that were fixed once before! So pulled motor back out, got some new brodix
heads, had to bore block .030 and 8 new pistons. So this is where we are now, block was bored earlier this week, heads are polished and being worked on and motor will be re-assembled.
Back to dyno and see where we are. In the meantime we are trying to finish the stuff we didn't have time to do, replace bunks on trailer, get carpet installed in boat, get Brian over
to do lettering etc etc. Should be back 1st of August and do some river time with it and see where we will get on the top 10 list! last pic it's sitting on see-doo cart in my garage
