19ft howard w/ splitbowl and place deverter

« **Reply #100 on:** March 24, 2010, 01:38:37 PM »

Your Pot O' Gold didn't include a crank did it? I am looking for a useable N crank for a 455 and your stuff seems to be priced right.

« **Reply #101 on:** March 24, 2010, 04:29:59 PM »

glasscutter I have three cranks but not the nodular iam going to run a CN if you need one of them let me know

« **Reply #102 on:** March 27, 2010, 02:07:38 PM »

Well got my boat flipped and here is what iam working with got some pics

« **Reply #103 on:** March 28, 2010, 08:05:11 AM »

The tank straps were through bolted and counter sunk causing spider cracks, Someone trayed a half ass repair. So I ground out the gall on bth sides and inside hull i laid three layers of matt and glass. outside hull I chopped up matt and filled hole then laid two more layers of matt. ground it flush . Now straight edge and finish rest of bottom shoot primer and block it. When done blocking it goes back on trailer and my freind is taking it to his shop in havasu where he has a booth . He has a ton of ppg epoxy paints lots of colors . best part its free very good old freind

« **Reply #104 on:** March 28, 2010, 09:53:02 AM »

Any avise guys

« **Reply #105 on:** March 29, 2010, 04:39:36 PM »

ok in primer on bottom block ing party starts soon

« **Reply #106 on:** March 29, 2010, 05:21:08 PM »

good work bro

« **Reply #107 on:** March 29, 2010, 07:22:49 PM »

Quote from: Ralph Brunt on March 29, 2010, 05:21:08 PM

good work bro

Are you taking notes compressor boy?

« **Reply #108 on:** March 29, 2010, 07:42:10 PM »

Quote from: Luckie Stiff on March 29, 2010, 07:22:49 PM

Are you taking notes compressor boy?

yup
sorry for the thread jac k

« **Reply #109 on:** March 29, 2010, 08:10:36 PM »

DAM SON! You're not messing around with this thing!

Ray

« **Reply #110 on:** March 29, 2010, 08:35:55 PM »

Thanks guys need to get it preped and down to torrance so my bud can take it to havasu and get color on it. Dam rist is killing me and it aint from jacking off LOL I think

« **Reply #111 on:** March 29, 2010, 09:18:16 PM »

lookin good Harry keep on sanding

« **Reply #112 on:** March 29, 2010, 09:36:48 PM »

Thanks gordy

Quote from: farmergord on March 29, 2010, 09:18:16 PM

lookin good Harry keep on sanding

« **Reply #113 on:** April 16, 2010, 05:06:00 PM »

Ok update today was dead at work so I took a vacation day and took all the old junk parts ive collected all OLDS to Mondellos and traded for some 30 over pistons & rings main & rod bearings and restricters for my motor , gotta love the bartter system . Hey Dave what do you normaly charge for boaring a block?

? Thats next

« **Reply #114 on:** April 18, 2010, 01:38:55 AM »

Quote from: honda1 on April 16, 2010, 05:06:00 PM

Ok update today was dead at work so I took a vacation day and took all the old junk parts ive collected all OLDS to Mondellos and traded for some 30 over pistons & rings main & rod bearings and restricters for my motor , gotta love the bartter system . Hey Dave what do you normaly charge for boaring a block?? Thats next

You won't like the price! Don't get me wrong, Dave does top notch work, But he told me he'd do his best to keep my bill under $20k........

J/K ! (He DID say that though!,

). Call Dave directly, (714)879-9671. Can prolly give ya a ballpark, but to be perfectly honest, while he has it, I'd just have the whole shootin match done to it. He might insist on it.

Mine might get worse as I am considering Ralph and his Pops to assemble them...............

Ray

« **Reply #115 on:** April 18, 2010, 06:12:12 AM »

Quote from: IRRebel on April 18, 2010, 01:38:55 AM

You won't like the price! Don't get me wrong, Dave does top notch work, But he told me he'd do his best to keep my bill under $20k........

J/K ! (He DID say that though!, ). Call Dave directly, (714)879-9671. Can prolly give ya a ballpark, but to be perfectly honest, while he has it, I'd just have the whole shootin match done to it. He might insist on it.

Mine might get worse as I am considering Ralph and his Pops to assemble them...............

Ray

we would just take it to dave and tack on our 20%

« **Reply #116 on:** April 18, 2010, 06:58:53 AM »

Quote from: Ralph Brunt on April 18, 2010, 06:12:12 AM

we would just take it to dave and tack on our 20%

I like that Ralph sublet the sublet lol

« **Reply #117 on:** April 24, 2010, 04:40:32 PM »

ok update blocked the primer down and shot another half gal of primer today used a red guide coat this time hopefully this is it for the bottom after that I will filp it again a set the intake and finish that off ,then start the deck and then color eight to nine coats of clear she should be ready to put back together $:-\$

« **Reply #118 on:** April 24, 2010, 05:15:19 PM »

doesnt sound like much if you say it fast

« **Reply #119 on:** April 24, 2010, 05:26:29 PM »

I know you know how much Gordy

« **Reply #120 on:** April 25, 2010, 04:44:44 PM »

blocking and more blocking and more blocking Checked the bottom with a six ft straight edge this thing has been blue printed in the past and is straight as can be on all the stakes , The more I work this hull the more I like it

« **Reply #121 on:** April 25, 2010, 06:35:06 PM »

lookin great Harry

« **Reply #122 on:** June 05, 2010, 08:40:57 PM »

Love this hull man great job LOL

« **Reply #123 on:** June 07, 2010, 03:59:07 AM »

Great work, Keep it up.

..RR

« **Reply #124 on:** June 30, 2010, 08:58:44 PM »

well spent the last three days in lake havasu city and found a house so I guess we are moving the 15th of the month

GlassCutter

honda1

honda1

honda1

honda1

honda1

Ralph Brunt

Luckie Stiff

Ralph Brunt

IRRebel

honda1

farmergord

honda1

honda1

IRRebel

Ralph Brunt

honda1

honda1

farmergord

honda1

honda1

farmergord

Howard19

River Roy

Howard19