77 sprint redo again

« **Reply #50 on:** June 18, 2014, 06:15:33 PM »

Quote from: jamiemwedmore1234 on June 18, 2014, 06:10:32 PM

The picture of you rear mount looks big does the mount sit behind you flywheel/ flex plate

Sent from my iPad using SoCal Jet Boats

Yeah could be the angle of the pic bolted everthing up during mock up and clearanced it all

Sent from my dirty buthole

« **Reply #51 on:** June 18, 2014, 06:33:01 PM »

On my boat it's cut around my flywheel you must have more room bbc or BBf

Sent from my iPad using SoCal Jet Boats

« **Reply #52 on:** June 18, 2014, 06:35:37 PM »

You cutt that all your self I need to make a new rear plate and front plate someone cut off the mounting hole where my alternator would have gone

Sent from my iPad using SoCal Jet Boats

« **Reply #53 on:** June 18, 2014, 08:27:30 PM »

Yeah used a vertical bandsaw and a router to clean the edges up. Use your old plate as a template and it will be easier to mark your holes too

Sent from my dirty buthole

« **Reply #54 on:** June 22, 2014, 08:46:15 AM »

Nice job, Justin!
I need your polishing skills. I suck at pollishing!
I really like the pillow blocks! Why do they call them "pillow blocks", anyways?

« **Reply #55 on:** June 22, 2014, 06:20:31 PM »

Quote from: holorinhal on June 22, 2014, 08:46:15 AM

Nice job, Justin!
I need your polishing skills. I suck at pollishing!
I really like the pillow blocks! Why do they call them "pillow blocks", anyways?

In SoCal we call them feet Hal 😜 but you can elaborate if you would like to

Sent from my dirty buthole

« **Reply #56 on:** June 23, 2014, 06:05:28 AM »

I guess feet work too!
I have always heard them called pillow blocks. I don't know why, i was asking you? They don't look like any pillow, I've ever seen.
Any ways, nice feet!

Sent from my iPhone using SoCal Jet Boats

« **Reply #57 on:** June 24, 2014, 09:57:57 AM »

Ya where did you them bad ass pillow blocks and where the hell is your motor?

« **Reply #58 on:** June 24, 2014, 06:34:55 PM »

Quote from: 787chuck on June 24, 2014, 09:57:57 AM

Ya where did you them bad ass pillow blocks and where the hell is your motor?

Thanks you chucky for your time and help with this thing and the pillow blocks are fancy thanks to you. As for motor well the new addition to the family put it on the sideline for a minute 😘

Sent from my dirty buthole

« **Reply #59 on:** June 25, 2014, 09:56:15 AM »

Quote from: Just Electric on June 24, 2014, 06:34:55 PM

Thanks you chucky for your time and help with this thing and the pillow blocks are fancy thanks to you. As for motor well the new addition to the family put it on the sideline for a min. a little birdy told me its moving forward

« **Reply #60 on:** June 25, 2014, 05:21:13 PM »

Nah it's all rumors besides its a polished turd and here's a pic of the wax to prove it 😜

Sent from my dirty buthole

« **Reply #61 on:** August 24, 2014, 06:40:26 PM »

Just an update it's a floatie holder for now lol

Sent from my iPhone using SoCal Jet Boats

« **Reply #62 on:** November 02, 2014, 07:04:48 PM »

Got back at it got the old machined intake out now time to reset the new one and do a few hardware changes

Sent from my iPhone using SoCal Jet Boats

« **Reply #63 on:** November 02, 2014, 08:11:31 PM »

What intake are you putting in it? Something really cool and trick I suspect!!

« **Reply #64 on:** November 02, 2014, 08:35:13 PM »

Quote from: icecreaman on November 02, 2014, 08:11:31 PM

What intake are you putting in it? Something really cool and trick I suspect!!

just a berk deal were gonna machine to be continued

Sent from my iPhone using SoCal Jet Boats

« **Reply #65 on:** November 02, 2014, 11:28:56 PM »

Get your mill wired in?

Sent from my SCH-I535 using SoCal Jet Boats mobile app

« **Reply #66 on:** November 04, 2014, 07:19:38 PM »

Quote from: Flusher on November 02, 2014, 11:28:56 PM

Get your mill wired in?

Sent from my SCH-I535 using SoCal Jet Boats mobile app

yeap got it delivered to my buddy's shop so now we can make some chips and make are own tools and clamps 👍. Ps I still got your manifold for ya lol

Sent from my iPhone using SoCal Jet Boats

« **Reply #67 on:** November 04, 2014, 07:21:46 PM »

Well got away from playing dad for a few hrs and got the boat prepped and ready for the new intake. Shitty part gonna have to re gel the bulge again or the third time since I can never make up my mind lol

Sent from my iPhone using SoCal Jet Boats

« **Reply #68 on:** November 04, 2014, 09:03:10 PM »

So why not a full set back Justin??

« **Reply #69 on:** November 04, 2014, 09:48:50 PM »

Quote from: icecreaman on November 04, 2014, 09:03:10 PM

So why not a full set back Justin??

i can but really no need to on this hull. If I were to do anything might just set it back 3 inches. I plan on getting in a winger or tunnel or a runner bottom in a few years so I'd rather blow
my wad on that and just machine the intakes I have laying around.

Sent from my iPhone using SoCal Jet Boats

« **Reply #70 on:** November 04, 2014, 09:51:10 PM »

I was gonna go with a low pro I have but after talking to stark and few other people at Ming I don't have the heart to grind that much material out of the boat or buy a dry sump system

Sent from my iPhone using SoCal Jet Boats

« **Reply #71 on:** November 09, 2014, 12:28:56 PM »

Where is this thing I'm bored

« **Reply #72 on:** November 09, 2014, 07:03:30 PM »

Quote from: tile man on November 09, 2014, 12:28:56 PM

Where is this thing I'm bored

ts coming to the shop in a few days 😜

Sent from my iPhone using SoCal Jet Boats

« **Reply #73 on:** May 20, 2015, 06:01:04 PM »

Well now that the kiddo is a year old and in between sleeping habits finally getting this pig back together prepped the hill for the new and improved I take and gonna start thrashing to get her done by Father's Day

Sent from my iPhone using SoCal Jet Boats

« **Reply #74 on:** May 20, 2015, 06:02:47 PM »

Here's the start of yet again more touch ups and flow coat on the builder area 😡

Sent from my iPhone using SoCal Jet Boats