Help Me I Need A Hull!!!

« **Reply #25 on:** February 28, 2014, 08:17:09 PM »

http://inlandempire.craigslist.org/boa/4342413862.html

Sent from my iPhone using SoCalJetBoats

« **Reply #26 on:** February 28, 2014, 08:18:56 PM »

Quote from: beerjet on February 28, 2014, 06:53:16 PM

Is that guy offering $250 to haul that boat away?

-beerjet-

Hahaha I hope so. Was the first one I saw. Just went with it.

Life is uncertain. Don't sip.

« **Reply #27 on:** February 28, 2014, 08:22:41 PM »

The hulls everyones posted are kind of beaters... what do you guys think?

can I get feedback on the crack in my boat?

« **Reply #28 on:** February 28, 2014, 08:25:10 PM »

Quote from: tamsone6 on February 28, 2014, 08:18:56 PM

Hahaha I hope so. Was the first one I saw. Just went with it.

Life is uncertain. Don't sip.

It's the thought that counts, right.

-beerjet-

« **Reply #29 on:** February 28, 2014, 08:39:25 PM »

Quote from: jack.townsend on February 28, 2014, 08:22:41 PM

The hulls everyones posted are kind of beaters... what do you guys think?

can I get feedback on the crack in my boat?

You get what you pay for you said next to nothing

Sent from my iPhone using SoCalJetBoats

« **Reply #30 on:** February 28, 2014, 09:13:01 PM »

Quote from: randog on February 28, 2014, 08:39:25 PM

You get what you pay for you said next to nothing

Sent from my iPhone using SoCalJetBoats

Exactly... Nothing good is cheap. And nothing cheap is good... Even more so with boats. The cheaper you get a hull the more work and money you're going to have to put into it to make it nice. You're pretty much going to have to scratch up a grand to 1500 to come up with anything remotely descent and even then you better look over it with a fine tooth comb. But seriously don't expect any show pieces for a good deal...

« **Reply #31 on:** February 28, 2014, 09:15:47 PM »

Quote from: jack.townsend on February 28, 2014, 08:22:41 PM

The hulls everyones posted are kind of beaters... what do you guys think?

can I get feedback on the crack in my boat?

Check your inbox...

-beerjet-

« **Reply #32 on:** February 28, 2014, 09:19:12 PM »

http://sandiego.craigslist.org/csd/boa/4354584061.html

http://sandiego.craigslist.org/nsd/boa/4346672428.html

« **Reply #33 on:** February 28, 2014, 11:25:37 PM »

Quote from: 76 Bonneville on February 28, 2014, 09:19:12 PM

http://sandiego.craigslist.org/csd/boa/4354584061.html

http://sandiego.craigslist.org/nsd/boa/4346672428.html

the home depot AC register on the hatch is a nice touch.

« **Reply #34 on:** March 01, 2014, 06:53:55 AM »

Come across this today.

SRC

Sent from my iPhone 5 using SoCalJetBoats mobile app

« **Reply #35 on:** March 01, 2014, 09:27:09 AM »

http://www.socaljetboats.com/index.php?topic=19475

It don't get any cheaper than this and it looks exactly like what your looking for.

Sent from my iPhone using SoCalJetBoats

« **Reply #36 on:** March 01, 2014, 11:41:14 AM »

My trailer is forsale. I have the clean title and permanent tags. New tires, single axle, led lights.. Nice trailer and... It comes with a free hull with brand new tags. I'll even give you the title for it. Fix the crack and have a badass boat haha. Here's some pics. And I'll sell you the bay jet pump too! 200$ firm!

« **Reply #37 on:** March 01, 2014, 08:42:58 PM »

Okay.. After to talk into some of my buddies up at Elimenator... They have talked me Into fixing my hull. They hooked me up with some fiberglass, resin and catalyst. And showed me how to do it.. I'll post some pics up of the repair and see if I don't fuck it up to bad haha

I also new a hand with my headers. I had logs on my 455 and got some bassets and hooked them all up but I need to know how to adjust the outlet valve(going out of the transom) and my intake valve going through my pump. Here's some pics of after I hooked it up

« **Reply #38 on:** March 01, 2014, 08:51:36 PM »

just a quick tip... avoid using a zip tie on a rubber hose. you can restrict flow when you squeeze the hose, also the zip tie can dig into the hose and with vibration it can cut it and you'll have a leak. fuel, water, etc... if you need to secure a hose, use a cushion clamp.

theres a ton of help here as far as fixing your hull. post pix of the process... we love pix.

« **Reply #39 on:** March 02, 2014, 07:54:02 AM »

Zips aren't bad if they are free floating. But if your mounting to fixed locations then a cushion is required.

« **Reply #40 on:** March 02, 2014, 09:53:31 AM »

I have the zip ties super loose there just there to keep it in the same location but I'll look into these clamps so it's not so ghetto haha.

Anybody know how to adjust my water cooling system?

« **Reply #41 on:** March 02, 2014, 10:28:04 AM »

There is a few discussions and opinions on this subject. ..search and get ready to read !

Sent from my SAMSUNG-SGH-I337 using SoCal Jet Boats mobile app

« **Reply #42 on:** March 02, 2014, 10:29:04 AM »

Yeah the best way is while under load on the lake or river.

« **Reply #43 on:** March 14, 2014, 08:28:51 AM »

Goodmorning Fellas. just an update i vallied out that crack and repaired it with 6 layers of glass. So hopefully that bitch holds. I also did a carb rebuild, oil change, and rerouted fuel lines and new fuel pump, and installed ott Basset Headers. I got her running yesterday and adjusted the carb accordingly. im going out in a couple hours to el cap too see if this thing floats... Cross your fingers! ill give an update once im back from testing

« **Reply #44 on:** March 14, 2014, 10:24:24 AM »

Quote from: jack.townsend on March 14, 2014, 08:28:51 AM

Goodmorning Fellas. just an update i vallied out that crack and repaired it with 6 layers of glass. So hopefully that bitch holds. I also did a carb rebuild, oil change, and rerouted fuel lines and new fuel pump, and installed ott Basset Headers. I got her running yesterday and adjusted the carb accordingly. im going out in a couple hours to el cap too see if this thing floats... Cross your fingers! ill give an update once im back from testing

right on man!! hope all goes well

« **Reply #45 on:** March 14, 2014, 11:04:08 AM »

Quote from: jack.townsend on March 14, 2014, 08:28:51 AM

Goodmorning Fellas. just an update i vallied out that crack and repaired it with 6 layers of glass. So hopefully that bitch holds. I also did a carb rebuild, oil change, and rerouted fuel lines and new fuel pump, and installed ott Basset Headers. I got her running yesterday and adjusted the carb accordingly. im going out in a couple hours to el cap too see if this thing floats... Cross your fingers! ill give an update once im back from testing

Hurry up and sell it.....

-beerjet-

« **Reply #46 on:** March 14, 2014, 11:22:49 AM »

I know I want that saguaro but I need to do a temporary fix on this thing to get out there at least beerjet

« **Reply #47 on:** March 14, 2014, 11:56:09 AM »

stop messing with that thing and just take my witchcraft for free.

« **Reply #48 on:** March 14, 2014, 06:10:23 PM »

I have a jacuzzi in a an older Howard daycruiser it's a damn good pump

Sent from my iPhone using SoCal Jet Boats

« **Reply #49 on:** March 14, 2014, 09:07:43 PM »

I have a few hulls to choose from. If all else fails. Eliminator, hawaiian, tahiti and a couple others

Sent from my SPH-L720 using SoCal Jet Boats mobile app

randog

tamsone6

jack.townsend

beerjet

randog

rhino

beerjet

76 Bonneville

ka0tyk

5150whiteboy

SoCalPSD

jack.townsend

jack.townsend

ka0tyk

Your Mom

jack.townsend

jetjunky101

GeneralLee

jack.townsend

riptide84

beerjet

jack.townsend

ka0tyk

89carribean

Cliffjumper