Alright fellas. I installed the transom caps, installed new water outlets on the transom, my gauges, steering, flip switch panel, and my shifter.
Now heres my problem with the shifter.. IM missing the clamp that holds the cable in the place. If anyone knows where i can get a clamp and what it looks like or anything?
My other thing is that my motor plates are to short so Im gonna extend them and drill out new holes for it. No big.
Then here comes the fucked part... So i plug and chugged my new gauges so i hope theyre hooked up right... I have 2 buttons that are hooked up to the wiring harness so i have to find out what those are. The wiring harness is connected to a labeled mini circuit breaker or something. So the install to the motor should be easy
And heres my other other problem... I run two batteries off a perko switch. But i dont know how to hook the batteries up correctly and all the other motor hookups. Any help or diagrams would be appreciated .
And heres the really fucked part... Another scjb member sold me a motor that he said was a 455 when in fact it was a 403... He wont make it right and isnt gonna refund me or take the motor back. So im fucking stuck with it. I took my distributor off my old 455 and put it on my 403 so that means i have to re do the timing and set the motor and carb all up... So if theres anyone in san diego that could help or lend a hand or knowledge would be greatly appreciated.
Thanks Guys!!!
