My New Project!

« **Reply #125 on:** November 22, 2009, 06:00:22 PM »

Quote from: IRRebel on November 22, 2009, 05:23:49 PM

Nick, that is some SWEET work and craftmanship. I thought the Schiada was bad ass!, That thing is gonna outshine all of us collectively! Great work!

Ray

Thanks Ray! Im trying to do it as clean looking as I can!

Quote from: Nordie on November 22, 2009, 05:21:15 PM

Can't wait to see it...is tpm a little too soon? I know you can get it done

Ya I dont think it will make it to the TPM in Elsinore. I still have alot of work to do and the motor is going to take some time to complete.

« **Reply #126 on:** November 22, 2009, 06:08:28 PM »

Quote from: cj222 on November 21, 2009, 07:08:12 PM

Thanks Tom. Well just got back from spending the day at R&D Marine.

thata boy, nick! keep going over there and distract the competition!!!

keep them from workin on their circle boat!

« **Reply #127 on:** November 22, 2009, 06:44:21 PM »

You never fail to impress me Nick with some of the trick out stuff you build very well thought out

« **Reply #128 on:** November 22, 2009, 06:50:26 PM »

Quote from: Brad @ SoCalJetBoats.com on November 22, 2009, 06:08:28 PM

thata boy, nick! keep going over there and distract the competition!!! keep them from workin on their circle boat!

Hell everyone was so busy working on the race boats they didnt even know I was there!

« **Reply #129 on:** November 22, 2009, 06:54:12 PM »

Quote from: boost on November 22, 2009, 06:44:21 PM

You never fail to impress me Nick with some of the trick out stuff you build very well thought out

Thanks bud! If you want to make something for your boat just let me know!

« **Reply #130 on:** November 23, 2009, 06:47:01 AM »

very nice work nick, can't wait to see this done

« **Reply #131 on:** November 23, 2009, 09:30:48 AM »

Quote from: FORKEDUP on November 23, 2009, 06:47:01 AM

very nice work nick, can't wait to see this done

Thanks bub! you and me both

« **Reply #132 on:** November 30, 2009, 05:58:35 PM »

Well I got my carbon fiber gauges today! And I also picked up a used stacked gas tank! I will be taking the brackets off the tank and have them powder coated and then I will re polish the tank! here is a couple pics.

« **Reply #133 on:** November 30, 2009, 06:13:02 PM »

« **Reply #134 on:** November 30, 2009, 06:14:16 PM »

« **Reply #135 on:** November 30, 2009, 06:29:37 PM »

dam if you don't mind me asking how much.. for the carbon fiber gauges thats just bad ass

« **Reply #136 on:** November 30, 2009, 07:33:39 PM »

Well the oil,fuel,water,and volt gauges were between 45.00 and 55.00 depending on the gauge. The tach was 129.00. All from summit racing.

« **Reply #137 on:** November 30, 2009, 07:36:41 PM »

Started cleaning up the tanks. Looking better!

« **Reply #138 on:** November 30, 2009, 08:11:04 PM »

zephyr pro 40 nick thats all i got to say!!!!! looking good

« **Reply #139 on:** November 30, 2009, 08:17:06 PM »

Looking good...but then so is everything else about this build!

« **Reply #140 on:** November 30, 2009, 08:22:33 PM »

Thanks for all the complements guys!

« **Reply #141 on:** November 30, 2009, 09:14:30 PM »

Quote from: cj222 on November 30, 2009, 07:33:39 PM

Well the oil,fuel,water,and volt gauges were between 45.00 and 55.00 depending on the gauge. The tach was 129.00. All from summit racing.

What about the streeing wheel lets see it.

« **Reply #142 on:** November 30, 2009, 09:18:43 PM »

I am sending it back. the 9 hole bolt pattern is different then the steering hub bolt pattern

I really liked that one too

Now I have to get the typical steering wheel that every one else runs.

« **Reply #143 on:** November 30, 2009, 09:22:44 PM »

Quote from: cj222 on November 30, 2009, 09:18:43 PM

I am sending it back. the 9 hole bolt pattern is different then the steering hub bolt pattern I really liked that one too Now I have to get the typical steering wheel that every one else runs.

Bro switch the hub or get an adapter?

« **Reply #144 on:** November 30, 2009, 09:35:49 PM »

I already have a one piece aluminum hub. Im not changing it. just going to get the right wheel to fit it.

« **Reply #145 on:** December 08, 2009, 05:53:22 PM »

So today after work I went and paid a visit to my old Boss who is a good friend of mine and he let me have at it with his Lathe. I started machining my steering wheel adapter for my new steering wheel that I got. My steering hub on the boat is a 9 hole pattern and so is the new steering wheel but the bolt hole circles are different, so I came up with a solution! Here are a couple pics of the Lathe work and the steering wheel. I am going to try and do the mill work tomarrow.

« **Reply #146 on:** December 08, 2009, 06:21:17 PM »

Attaboy!

Adapt it and make it look trick, Usually turns out better anyway, especially with your skillz!

Ray

« **Reply #147 on:** December 08, 2009, 07:17:36 PM »

Thanks Bro!

« **Reply #148 on:** December 08, 2009, 07:31:53 PM »

Quote from: IRRebel on December 08, 2009, 06:21:17 PM

Attaboy!

especially with your skillz!

Ray

i was thinking the same thing

« **Reply #149 on:** December 08, 2009, 08:44:37 PM »

Thanks Ralph!

MADSKILLZ

Brad @ SCJB

BOOST

MADSKILLZ

MADSKILLZ

FORKEDUP

MADSKILLZ

MADSKILLZ

BOOST

MADSKILLZ

challenger

MADSKILLZ

MADSKILLZ

Nordie

OC2Vegas

MADSKILLZ

BOOST

MADSKILLZ

BOOST

MADSKILLZ

MADSKILLZ

IRRebel

MADSKILLZ

Ralph Brunt

MADSKILLZ