Hallett...Someone tell me more about this thing

« **Reply #25 on:** June 19, 2014, 08:13:59 AM »

Quote from: mash on it on June 19, 2014, 08:03:46 AM

G bowl is a split bowl, for being able to add a droop, wedges, etc.
C bowl doesn't have a split- but can still have a diverter, rideplate, etc
They are can be swapped.

Dan'l

Thanks for the explanation, I've been thinking it was something internal every time I saw it come up.

Sent from my iPhone using SoCal Jet Boats

« **Reply #26 on:** June 19, 2014, 08:34:02 AM »

Quote from: mash on it on June 19, 2014, 12:05:36 AM

Don't dis on the 'C' bowl, just the olds

Dan'l

OUCH !

« **Reply #27 on:** June 20, 2014, 06:26:07 PM »

Alright guys, I'm gonna go ahead and make the drive out to see this thing...

My question to you guys is what are the main things I should be looking for beyond the obvious. Someone has already mentioned the foam in the bow and whether the fiberglass tanks have been replaced. Are there any other things I should look for that may help me in negotiating?

« **Reply #28 on:** June 20, 2014, 07:33:11 PM »

Quote from: PelicanKing on June 20, 2014, 06:26:07 PM

Alright guys, I'm gonna go ahead and make the drive out to see this thing...

My question to you guys is what are the main things I should be looking for beyond the obvious. Someone has already mentioned the foam in the bow and whether the fiberglass tanks have been replaced. Are there any other things I should look for that may help me in negotiating?

The underside.....
Check for obvious damage.
Make sure the seal around the intake isn't broken either.
Soft spots in the floor.
Make sure the bottom is straight.

-beerjet-

« **Reply #29 on:** June 21, 2014, 11:10:16 AM »

I hate spending money...

Sent from my iPhone using SoCal Jet Boats

« **Reply #30 on:** June 21, 2014, 11:10:55 AM »

Where's the easiest place to launch in Blythe for a test drive?

Sent from my iPhone using SoCal Jet Boats

« **Reply #31 on:** June 21, 2014, 11:28:43 AM »

Launching at Mac is pretty easy!!! Plus it's only $10. If your by yourself you can walk the boat to the beach and park your vehicle

SRC

Sent from my iPhone using SoCalJetBoats

« **Reply #32 on:** June 21, 2014, 11:30:52 AM »

Perfect, thank you!

Sent from my iPhone using SoCal Jet Boats

« **Reply #33 on:** June 21, 2014, 02:44:52 PM »

I knew I should have put on new tires in Phoenix...

All just part of the adventure...

Sent from my iPhone using SoCal Jet Boats

« **Reply #34 on:** June 21, 2014, 03:52:19 PM »

That was relatively painless. $400, 4 new shoes and we're on the road again! Joe's Tires in Blythe, they were fast!

Sent from my iPhone using SoCal Jet Boats

« **Reply #35 on:** June 21, 2014, 04:00:31 PM »

Did they blowout

Sent from my SPH-L710 using Tapatalk

« **Reply #36 on:** June 21, 2014, 06:48:01 PM »

Quote from: dezerttoyota on June 21, 2014, 04:00:31 PM

Did they blowout

Sent from my SPH-L710 using Tapatalk

The starboard rear disintegrated and the others still looked good but likely weren't far behind. I was about 30 miles outside of Blythe when it happened so I did the old strap up the axle deal and made it into Quartzite before a punk ass state trooper kicked me off the highway. Pulled into Mcdonalds, put her up on some rocks and ran into Blythe with all 4 wheels, back to the boat and wife in under an hour.

Sent from my iPhone using SoCal Jet Boats

« **Reply #37 on:** June 21, 2014, 07:30:13 PM »

Oh and we still had time to put it on the water...

Wife liked this picture of herself, ARRRRRRR!

Sent from my iPhone using SoCal Jet Boats

« **Reply #38 on:** June 21, 2014, 07:56:14 PM »

So, what’s the verdict? By the way, could I trouble you for some pics of the engine? I am particularly interested in the the engine mounting and the bellhousing area that I can’t quite make out in this pic. Thanks, hope you enjoy it.
Beautiful boat.
Cheers,

Joe

« **Reply #39 on:** June 21, 2014, 08:01:36 PM »

She's a beaut!

-beerjet-

« **Reply #40 on:** June 21, 2014, 08:08:03 PM »

Quote from: Flusher on June 21, 2014, 07:56:14 PM

So, what’s the verdict? By the way, could I trouble you for some pics of the engine? I am particularly interested in the the engine mounting and the bellhousing area that I can’t quite make out in this pic. Thanks, hope you enjoy it.
Beautiful boat.
Cheers,

Joe

Honestly you gave me good advice earlier in the thread when you said this boat will give me instant gratification but I'll still be able to enjoy the project. The wife and I are stoked on it and I don't know what fast is but all I know is when I turned my head to look at the roost my sun glasses flew off, good enough for me.....for now anyways.

I'll get you some better pictures tomorrow, we're about 30 miles out of Indio right now (wife's driving) and I've got a job in the morning but will likely head out on Elsinore tomorrow and get some pictures then, or just in the driveway if not.

Sent from my iPhone using SoCal Jet Boats

« **Reply #41 on:** June 21, 2014, 08:16:13 PM »

Quote from: beerjet on June 21, 2014, 08:01:36 PM

She's a beaut!

-beerjet-

Thanks man, she's far from perfect but it strikes a chord with me for some reason. I probably got too emotionally attached and broke a couple of my rules for buying things but it's done now.

Sent from my iPhone using SoCal Jet Boats

« **Reply #42 on:** June 21, 2014, 08:20:04 PM »

Quote from: PelicanKing on June 21, 2014, 08:16:13 PM

Thanks man, she's far from perfect but it strikes a chord with me for some reason. I probably got too emotionally attached and broke a couple of my rules for buying things but it's done now.

Sent from my iPhone using SoCal Jet Boats

Rules were meant to be broken!

-beerjet-

« **Reply #43 on:** June 21, 2014, 09:26:52 PM »

Congratulations! I like your choice. Joe gave you good advice, that will make a nice first project boat for you guy's. Quality boat!

« **Reply #44 on:** June 23, 2014, 10:19:18 PM »

great hulls, they handle great for a small boat, looks like you have a good start

« **Reply #45 on:** June 24, 2014, 04:35:10 PM »

Quote from: Flusher on June 21, 2014, 07:56:14 PM

So, what’s the verdict? By the way, could I trouble you for some pics of the engine? I am particularly interested in the the engine mounting and the bellhousing area that I can’t quite make out in this pic. Thanks, hope you enjoy it.
Beautiful boat.
Cheers,

Joe

« **Reply #46 on:** June 24, 2014, 05:20:05 PM »

Quote from: PelicanKing on June 24, 2014, 04:35:10 PM

There is some sexy hardware there.
Haven't heard the name Tuff Enuff in a long time as well.
Real nice boat!

-beerjet-

« **Reply #47 on:** June 24, 2014, 05:25:41 PM »

Saw the boat at Elsinore Sunday. Looked great!

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #48 on:** June 24, 2014, 05:36:49 PM »

Looks really nice. Would love to go for a ride if you ever have an open seat.

Sent from my SCH-I535 using SoCal Jet Boats mobile app

« **Reply #49 on:** June 24, 2014, 05:58:02 PM »

Quote from: beerjet on June 24, 2014, 05:20:05 PM

There is some sexy hardware there.
Haven't heard the name Tuff Enuff in a long time as well.
Real nice boat!

-beerjet-

Thanks man, you were largely responsible for getting me stoked on Halletts. I need to get to one of the SCJB get togethers to meet all you guys.

Quote from: cmayer on June 24, 2014, 05:25:41 PM

Saw the boat at Elsinore Sunday. Looked great!

Sent from my iPhone using SoCalJetBoats mobile app

It was nice meeting you and your family, hopefully we'll see you out some time soon.

Quote from: Flusher on June 24, 2014, 05:36:49 PM

Looks really nice. Would love to go for a ride if you ever have an open seat.

Sent from my SCH-I535 using SoCal Jet Boats mobile app

Anytime, let me know when you're going out. I can't believe I just noticed that you've got a Hallett, do you have a thread on yours?

PelicanKing

GlassCutter

PelicanKing

beerjet

PelicanKing

PelicanKing

Kroggy3771

PelicanKing

PelicanKing

PelicanKing

dezerttoyota

PelicanKing

PelicanKing

Flusher

beerjet

PelicanKing

PelicanKing

beerjet

icecreaman

78CoLe

PelicanKing

beerjet

cmayer

Flusher

PelicanKing