Post up your cool work pics

« **Reply #400 on:** February 21, 2015, 12:21:50 PM »

Heres some of my work pics...

« **Reply #401 on:** February 22, 2015, 06:35:18 AM »

I got an easy life. All So. O.C. always by the beach

« **Reply #402 on:** February 22, 2015, 07:14:32 AM »

Just finished fixing this bird. I love double time. 12 hours. Oh yea!

« **Reply #403 on:** February 22, 2015, 09:36:21 AM »

Here is a clean picture of a remote control I use. I play with RC trains all day.

Sent from my iPhone using SoCal Jet Boats

« **Reply #404 on:** February 22, 2015, 11:29:06 AM »

Quote from: Tomale 1 on February 22, 2015, 06:35:18 AM

I got an easy life. All So. O.C. always by the beach

Why is there soo much space between truck n trailer.....is it so you can dump without unhooking?

« **Reply #405 on:** February 22, 2015, 11:36:10 AM »

Quote from: 74hondo on February 22, 2015, 09:36:21 AM

Here is a clean picture of a remote control I use. I play with RC trains all day.

Sent from my iPhone using SoCal Jet Boats

So is there something inside the train you have to set up to listen to remote? How do you control more than one train? .....in a day,not at a time...

« **Reply #406 on:** February 22, 2015, 01:24:29 PM »

Yes there is a control box you have to setup inside the Locomotive to put it into remote mode. There are certain Locos that are built for RC operations. Each crew uses a set of two Locos per shift to move and build trains in a yard. After a train is fully built road Locos are put on in place of the RCs and sent off to the next yard.

Sent from my iPhone using SoCal Jet Boats

« **Reply #407 on:** February 22, 2015, 02:40:19 PM »

For that and for weight distribution. Legal out 80,000lbs

« **Reply #408 on:** February 22, 2015, 02:41:48 PM »

What I get to look at everyday

« **Reply #409 on:** February 22, 2015, 02:47:17 PM »

Quote from: Tomale 1 on February 22, 2015, 02:41:48 PM

What I get to look at everyday

thats too bad man....sorry to hear that....let us know if you need to "get away"...

« **Reply #410 on:** February 22, 2015, 02:49:24 PM »

Quote from: JARVIS on February 22, 2015, 02:47:17 PM

thats too bad man....sorry to hear that....let us know if you need to "get away"...

x2 Can't imagine doing that everyday. If you ever wanna swap for a day let me know.

"RTCP"

« **Reply #411 on:** February 22, 2015, 03:02:13 PM »

Quote from: 74hondo on February 22, 2015, 01:24:29 PM

Yes there is a control box you have to setup inside the Locomotive to put it into remote mode. There are certain Locos that are built for RC operations. Each crew uses a set of two Locos per shift to move and build trains in a yard. After a train is fully built road Locos are put on in place of the RCs and sent off to the next yard.

Sent from my iPhone using SoCal Jet Boats

what locos do you use for remote switching? (sorry for the third degree, ive been into model railroading since i was a kid, rail yard ops interests me)

« **Reply #412 on:** February 22, 2015, 04:03:40 PM »

Typically EMD locomotives which are made by General Motors. We also use new Gensets which are new and have three caterpillar engines in them. The pairs usually look like these.

Sent from my iPhone using SoCal Jet Boats

« **Reply #413 on:** February 22, 2015, 04:04:17 PM »

The EMDs where usually made in the 70s

Sent from my iPhone using SoCal Jet Boats

« **Reply #414 on:** February 22, 2015, 04:18:01 PM »

Quote from: capogniracing on February 22, 2015, 02:49:24 PM

x2 Can't imagine doing that everyday. If you ever wanna swap for a day let me know.

"RTCP"

Naw I'm good. Life is a lil hard but I'll just deal with it. :-)

« **Reply #415 on:** February 22, 2015, 04:21:37 PM »

Quote from: 74hondo on February 22, 2015, 04:04:17 PM

The EMDs where usually made in the 70s

Sent from my iPhone using SoCal Jet Boats

gp35?

« **Reply #416 on:** February 22, 2015, 08:15:29 PM »

Using an SD40-2

Sent from my iPhone using SoCal Jet Boats

« **Reply #417 on:** February 23, 2015, 02:20:50 PM »

Here are a couple of my work pictures.

Sent from my iPhone using SoCal Jet Boats

« **Reply #418 on:** March 04, 2016, 09:10:04 AM »

9 axle load leaving the yard today...
100k machine with a 64 ft reach!

Sent from my iPhone using SoCalJetBoats

« **Reply #419 on:** March 04, 2016, 09:24:47 AM »

If you dont have a chuck norris wall at work then you just aint livin.

« **Reply #420 on:** March 04, 2016, 09:44:21 AM »

Live better work union out here putting in work at UCLA college

Sent from my iPhone using SoCal Jet Boats

« **Reply #421 on:** March 04, 2016, 11:46:05 AM »

Quote from: AnthonyH3 on March 04, 2016, 09:44:21 AM

Live better work union out here putting in work at UCLA college

Sent from my iPhone using SoCal Jet Boats

Love my sticker

Sent from my iPhone using SoCal Jet Boats

« **Reply #422 on:** March 04, 2016, 12:07:10 PM »

Broken finger?

« **Reply #423 on:** March 04, 2016, 12:09:49 PM »

Quote from: bubblin_hallett on March 04, 2016, 12:07:10 PM

Broken finger?

My professional guess would be yes.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #424 on:** March 04, 2016, 12:35:24 PM »

Quote from: bubblin_hallett on March 04, 2016, 12:07:10 PM

Broken finger?

Ok....we gotta hear what happened...looks like the bone is sticking out!

Squirrel Master

Tomale 1

JohnnyHavasu

74hondo

JARVIS

JARVIS

74hondo

Tomale 1

Tomale 1

JARVIS

capogniracing

JARVIS

74hondo

74hondo

Tomale 1

JARVIS

74hondo

atemp139

More2LifeThanMPG

FordLover

AnthonyH3

Jetonthewater16ft

bubblin_hallett

flytime

JARVIS