I have a fuel injection system and I'm looking for a water pump is there anyone have one


I'm looking for a timing chain cover for the fuel pump in someway to hook the water pump to
It's my first time in Feel Injection

498 almost done with it


I'm looking for a timing chain cover for the fuel pump in someway to hook the water pump to
It's my first time in Feel Injection

Cant help there,, but i run a 12 volt utility water pump mounted to the stringer on my v-drive, works bitchin if that can work for you..

Sent from my MB860 using SoCal Jet Boats mobile app

Check with good vibrations online...


Sent from my iPhone using SoCal Jet Boats

That Mike Kuhl deal is the way to go.

You will need a cam hex drive and a timing cover with a mount for the water pump/fuel pump.  You might need an extension to clear your damper.  The hex drive will also act as a thrust bearing for your cam as a bearing will slip over it and shim against the inside of the timing cover.

If you don't wish to deal with driving off the cam, you can always run a belt drive remote mount available from the companies listed above as well as Kinsler, Enderle, Hilborn, Ron's, FIE, et al.

Can't wait to see it on the water!

Cheers,

Joe

I'm looking for a Jen 6 hex head size 3/8 that mounts on front of the Cam and it runs a river rat water pump and does anybody know where I can find one or build me one


I have a scat crank and I'm trying to figure out what internal flex plate to use. It's a mark 4 block 454