Another milky oil thread ...

« **Reply #75 on:** January 21, 2015, 08:50:00 PM »

Quote from: Tylertjeep73 on January 21, 2015, 07:27:23 PM

Began pulling it apart tonight
Any input what I'm working with ?

If I read the numbers right

,
1967 oval port 101 cc closed chamber.

http://www.castingnumbers.info/site/detail/488/3909802

« **Reply #76 on:** January 21, 2015, 08:56:25 PM »

I'm assuming that means good lol?

« **Reply #77 on:** January 22, 2015, 07:19:17 PM »

Pulled one head

)

« **Reply #78 on:** January 22, 2015, 07:23:19 PM »

Well full roller motor it would appear.

Sent from my iPhone using SoCal Jet Boats

« **Reply #79 on:** January 22, 2015, 07:30:31 PM »

Full roller first head was good no bad gasket so I'll do the second one tomorrow

Also the valves look really big ...

Anyone ??

« **Reply #80 on:** January 22, 2015, 07:35:36 PM »

Do you have a dial caliper?

Sent from my iPhone using SoCal Jet Boats

« **Reply #81 on:** January 22, 2015, 07:43:07 PM »

I have a digital ... Starrett

« **Reply #82 on:** January 22, 2015, 07:45:32 PM »

Guess you need to measure those valves.

Sent from my iPhone using SoCal Jet Boats

« **Reply #83 on:** January 22, 2015, 07:51:29 PM »

Will do taking my chick to eat since she sat and watched me pull that for an hour and a half haha

« **Reply #84 on:** January 22, 2015, 08:02:12 PM »

Quote from: Tylertjeep73 on January 22, 2015, 07:51:29 PM

Will do taking my chick to eat since she sat and watched me pull that for an hour and a half haha

You should have handed her a wrench LOL

« **Reply #85 on:** January 22, 2015, 08:54:30 PM »

Haha she was handing me wrenches and beers lol
I think one cylinder head weighs more than her though so she was useless there haha

« **Reply #86 on:** January 22, 2015, 09:02:54 PM »

Quote from: Tylertjeep73 on January 22, 2015, 08:54:30 PM

Haha she was handing me wrenches and beers lol
I think one cylinder head weighs more than her though so she was useless there haha

Hand her a wrench and a hoist. BAM!! Done.

« **Reply #87 on:** January 23, 2015, 03:42:05 AM »

Valves are 2.22 and 1.96

« **Reply #88 on:** January 23, 2015, 07:59:44 AM »

Tyler your doing fine if you start listening to most of these guy's you won't have her. Beer and wrenches is just what you want and maybe a little parts running. Oh and on the parts thing make sure that you placed them on will call.

Sent from my iPhone using SoCal Jet Boats

« **Reply #89 on:** January 23, 2015, 08:42:41 AM »

Get her into it, my girlfriend/wife helped me set my motor in the CP, and she loves helping me wrench!

"RTCP"

« **Reply #90 on:** January 23, 2015, 10:51:07 AM »

Haha I must be doing somethin right lol these heads must have some pretty mean flow with valves that big
factory is much smaller right ?

« **Reply #91 on:** January 23, 2015, 05:46:18 PM »

Well pulled the other head that one front cylinder was definitely getting steam cleaned
No obvious signs of a head gasket leak :/... Makes me worry I felt like the head bolts around it were looser too though
The valve guide on the exhaust side seems to be pushed up too took a pic of a good one and bad one for comparison
Any cylinder head gurus here

Or someone with a crack testing machine ? Magnaflux haha

« **Reply #92 on:** January 31, 2015, 03:43:59 PM »

Hey buddy how is the motor coming along in the Hallett?

« **Reply #93 on:** January 31, 2015, 03:58:47 PM »

Heads should be done Monday ... I'm gearing up to pull the block so I can paint it figure I should do it while I'm here and it's winter

« **Reply #94 on:** January 31, 2015, 04:00:25 PM »

Heard that. What color are you going to paint it?

« **Reply #95 on:** January 31, 2015, 04:11:37 PM »

Red future plans dictate it should be red lol

« **Reply #96 on:** January 31, 2015, 04:14:44 PM »

Quote from: Tylertjeep73 on January 31, 2015, 04:11:37 PM

Red future plans dictate it should be red lol

Sounds good. Red is a good color on a block. What about Chevy orange since it is a chevy motor. just an idea.

« **Reply #97 on:** January 31, 2015, 04:17:33 PM »

Crossed my mind but it hasto be red it's the only way

!

« **Reply #98 on:** January 31, 2015, 04:21:43 PM »

That will look good my friend!!

« **Reply #99 on:** January 31, 2015, 04:30:37 PM »

It will next season when it gets paint

TrollerDave

Tylertjeep73

Tylertjeep73

angermgmt

Tylertjeep73

angermgmt

Tylertjeep73

angermgmt

Tylertjeep73

Flusher

Tylertjeep73

TrollerDave

Tylertjeep73

jimpen

capogniracing

Tylertjeep73

Tylertjeep73

hallett1974

Tylertjeep73

hallett1974

Tylertjeep73

hallett1974

Tylertjeep73

hallett1974

Tylertjeep73